Chisti M Y. Airlift Bioreactors[M].London:Elsevier Applied Science, 1989
[2]
Liu M X, Lu C X, Shi M X. Hydrodynamic behaviour of a gas-solid air-loop stripper[J].Chinese Journal of Chemical Engineering, 2004,12:55-59
[3]
Liu M X, Lu C X, Zhu X M, Xie J P, Shi M X.Bed density and circulation mass flowrate in a novel annulus-lifted gas-solid air loop reactor[J].Chemical Engineering Science, 2010,65(22):5830-5840
[4]
Xie D, Lim C J, Grace J R, Adris A E M.Gas and particle circulation in an internally circulating fluidized bed membrane reactor cold model[J].Chemical Engineering Science, 2009,64:2599-2606
[5]
Lee J M, Kim Y J, Kim S D.Catalytic coal gasification in an internally circulating fluidized bed reactor with draft tube[J].Applied Thermal Engineering, 1998,18:1013-1024
[6]
Kim S D, Kim Y H, Roh S A, Lee D H.Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube[J].Korean Journal of Chemical Engineering, 2002,19(5), 911-916
[7]
Choi Y T, Kim S D.Bubble characteristics in an internally circulating fluidized bed[J].Journal of Chemical Engineering Japan, 1991,24:195-202
[8]
Xie Jianping(谢建平).Study on flow behaviour of the annulus spargered gas-solid loop reactor[D].Beijing:China University of Petroleum, 2007
[9]
Yang W C, Margaritis P J, Keairns D L.Design of recirculating fluidized beds for commercial applications[J].AIChE Symp.Ser., 1978,74:218-228
[10]
Byung H S, Young T K, Sang D K.Circulation of solid and gas bypassing in an internally circulating fluidized bed with a draft tube[J].Chemical Engineering Journal, 1997,68:115-122
[11]
Jeon H J,Kim S D,Kim S J,Kong Y.Solid circulation and gas bypassing characteristics in a square internally circulating fluidized bed with draft tube[J].Chemical Engineering and Processing, 2008,47:2351-2360
[12]
Ahn H S, Lee W J, Kim S D, Song B H.Solid circulation and gas bypassing in an internally circulating fluidized bed with an orifice-type draft tube[J].Korean Journal of Chemical Engineering, 1999,16(5):618-623
[13]
Claflin J K, Fane A G.Spouting with a porous draft-tube[J].Canadian Journal of Chemical Engineering, 1983,61:356-363
[14]
Song B H, Young T K, Sang D K.Circulation of solid and gas bypassing in an internally circulating fluidized bed with a draft tube[J].Chemical Engineering Journal,1997,68:115-122
[15]
Shih H H, Chu C Y, Hwang S J.Solids circulation and attrition rates and gas bypassing in an internally circulating fluidized bed[J].Industrial Engineering Chemical Research,2003,42:5915-5923
[16]
Chandel M K, Alappat B J.Pressure drop and gas bypassing in recirculating fluidized beds[J].Chemical Engineering Science, 2006,61:1489-1499
[17]
Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜).Study of new kind of stripper[J].Petrochemical Technology(石油化工), 2001,30(11):850-854
[18]
Zhu Xiaoming(朱效明).Study on the configuration of the annulus lifted gas-solid air loop reactor[D].Beijing:China University of Petroleum, 2005
[19]
Liu Mengxi(刘梦溪), Niu Zhanchuan(牛占川), Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Affect of draft tube gas distributor on hydrodynamics in an annulus-lifted gas-solid air loop reactor[J].CIESC Journal(化工学报), 2010,61(9):2250-2256
[20]
Sun Fuwei(孙富伟).Study and development of new FCC regenerated catalyst coolers with inner particle circulation[D].Beijing:China University of Petroleum, 2011
[21]
Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Hydrodynamics and mass transfer characteristics of a novel two-stage internal airlift loop reactor[J].The Chinese Journal of Processing Engineering(过程工程学报), 2006,6(2):398-402
[22]
Liu Mengxi(刘梦溪), Xie Jianping(谢建平),Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Theoretical analysis of hydrodynamics in novel gas-solid annulus-spargered airlift loop reactor[J].Journal of Chemical Industry and Engineering(China)(化工学报),2008,59(9):2198-2205
[23]
Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Particle velocity distribution in a single stage high level gas-solid annular flow stripper[J].Petrochemical Technology(石油化工), 2002,31(10):815-819
[24]
Zhu Xiaoming(朱效明),Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Characteristics of solid velocity in an annulus-lifted gas-solid loop reactor[J].Chemical Reaction Engineering Technology(化学反应工程与工艺), 2008,24(4):295-300
[25]
Wang Dewu(王德武), Yan Chaoyu(严超宇), Lu Chunxi(卢春喜).Effect of distributor types on the hydrodynamics behavior in a compound gas-solid airlift loop reactor[J].Petroleum Processing and Petrochemicals(石油炼制与化工), 2011,42(5):50-56
[26]
Liu Mengxi(刘梦溪).Research on a novel gas-solid airlift loop reactor with two draft tubes[D].Beijing:China University of Petroleum, 2001
[27]
Zhao X L, Yao Q, Li S Q.Effects of draft tubes on particle velocity profiles in spouted beds[J].Chemical Engineering Technology,2006,29:875-881
[28]
Milne B J, Berruti F, Behie L A, De Bruijn T J W.The internally circulating fluidized bed:a novel solution to gas bypassing in spouted beds[J].Canadian Journal of Chemical Engineering, 1992,70:910-915
[29]
Ishikura T, Nagashima H, Ide M.Hydrodynamics of a spouted bed with a porous draft tube containing a small amount of finer particles[J].Powder Technology, 2003,131:56-65
[30]
Chu C Y, Hwang S J.Attrition and sulfation of calcium sorbent and solids circulation rate in an internally circulating fluidized bed[J].Powder Technology, 2002,127:185-195
[31]
Berruti F, Muir J R, Behie L A.Solids circulation in a spout-fluid bed with draft tube[J].Canadian Journal of Chemical Engineering, 1988,66:919-923
[32]
Alappat B J, Rane V C.Studies on the effects of various design and operational parameters on solid circulation rate in a recirculating fluidized bed[J].Canadian Journal of Chemical Engineering, 1995,73(4):248-252
[33]
Yan C Y, Lu C X, Zhang Y M, Wang D W, Liu M X.Profiles of solid fraction and heterogeneous phase structure in a gas-solid airlift loop reactor[J].Chemical Engineering Science, 2010,65(22):5830-5840
[34]
Konduri R K, Altwicker E R, Morgan III M H.Design and scale-up of a spouted-bed combustor[J].Chemical Engineering Science, 1999,54:185-204
[35]
Zhang Yongmin(张永民), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Large-scale cold pilot experiment on a new annular catalyst stripper for FCC units[J].Journal of Chemical Engineering of Chinese Universities(高校化学工程学报), 2004,18(3):377-380
[36]
Liu Xiancheng(刘显成), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Study on heat transfer between gas-solids suspension and the surfaces of two draft tubes in an airlift loop heat exchanger[J].The Chinese Journal of Process Engineering(过程工程学报), 2004,4(Suppl.):611-618
[37]
Liu Xiancheng(刘显成), Lu Chunxi(卢春喜), Shi Mingxian(时铭显).An airlift loop heat exchanger[P]:CN,1627035.2005
[38]
Ozkaynak T F, Chen J C.Emulsion phase residence time and its use in heat transfer models in fluidized beds[J].AIChE Journal, 1980,26(4):544-550
[39]
Lu Chunxi(卢春喜), Xu Guiming(徐桂明), Lu Shuigen(卢水根), Shi Mingxian(时铭显).Study and industry application of a pre-stripping separation system for riser termination of FCCU[J].Petroleum Processing and Petrochemicals(石油炼制与化工), 2002,33(1):33-37
[40]
Lu Chunxi(卢春喜), Shi Mingxian(时铭显).Novel catalytic cracking riser termination devices in China[J].Petrochemical Technology & Application(石化技术与应用), 2007,25(2):142-146 Technology target="_blank">
[41]
Xu Kewei(许可为).Revamping of FCC unit with CSC rapid-separation technology[J].Petroleum Refinery Engineering(炼油技术与工程), 2005,35(5):11-13
[42]
Lu Chunxi(卢春喜), Liu Weimin(刘为民), Gao Jinsen(高金森), Xu Chunming(徐春明), Mao Yu(毛羽), Shi Mingxian(时铭显).Integrated technique and application of heavy oil catalytic cracking reaction system[J].Petrochemical Technology &Application(石化技术与应用), 2006,24(1):1-4 Technology target="_blank">
[43]
Xu Kejia(许克家).Study on dense-phase airlift loop stripper for quick separator of riser of FCC[D].Beijing :China University of Petroleum, 1998
[44]
Liu Mengxi(刘梦溪), Lu Chunxi(卢春喜), Wang Zhu’an(王祝安).Combined catalyst stripper[P]:CN,10111267. 2008
[45]
Li Peng(李鹏), Liu Mengxi(刘梦溪), Han Shouzhi(韩守知), Lu Chunxi(卢春喜).Commercialization of disc and donut airlift loop hybrid stripper in fluidized bed catalytic cracking unit of Yangzi Petrochemical Company[J].Petrochemical Technology & Application(石化技术与应用), 2009,27(1):32-35 Technology --- unreasonable DOI found: doi=Petrochemical Technology target="_blank">
[46]
Gao J S, Chang J, Lan X Y, Yang Y, Lu C X, Xu C M.CFD modeling of mass transfer and stripping efficiency in FCCU strippers[J].AIChE Journal, 2008,54(5 ):1164-1177
[47]
Lu Chunxi(卢春喜), Wang Dewu(王德武), Gao Jinsen(高金森), Wang Zhu’an(王祝安).A riser and gas-solid loop coupled reaction equipment[P]:CN, 200810084405. 2. 2008-09-10
[48]
Wang Dewu(王德武), Lu Chunxi(卢春喜).Distributions of solids hold-up in the airlift loop fluidized bed of a riser-airlift loop fluidized bed coupled reactor[J].The Chinese Journal of Process Engineering(过程工程学报), 2008,8(6):1051-1056
