李润方, 王建军. 齿轮系统动力学-振动、冲击、噪声[M]. 北京: 科学出版社, 1997: 177―180. Li Runfang, Wang Jianjun. Gear system dynamics vibration, shock, noise [M]. Beijing: Science Press, 1997: 177―180. (in Chinese)
[2]
Wallace D B, SEIREG A. Computer simulation of dynamic Stress, deformation, and fracture of gear teeth [J]. Journal of Manufacturing Science and Engineering, 1973, 95(4): 1108―1114.
[3]
Ramamurti V, Rao M A. Dynamic analysis of spur gear teeth [J]. Computers & Structures, 1998, 29(5): 831―843.
[4]
唐进元, 彭方进, 黄云飞. 冲击载荷下的齿轮动应力变化规律数值分析[J]. 振动与冲击, 2009, 28(8): 138―142. Tang Jinyuan, Peng Fangjin, Huang Yunfei. Numerical analysis of gear dynamic stress under impact load [J]. Journal of Vibration and Shock, 2009, 28(8): 138―142. (in Chinese)
[5]
胡社来. 大型船用二级人字齿轮传动有限元分析[D]. 武汉: 武汉理工大学, 2005. Hu Shelai. Finite element analysis of two-stage large marine herringbone gear transmission system [D]. Wuhan: Wuhan University of Technology, 2005. (in Chinese)
[6]
林觉慧. 齿轮失效常见的几种形式[J]. 科技资讯, 2007(16): 67. Lin Juehui. Several common forms of gear failure [J]. Science & Technology Information. 2007(16): 67. (in Chinese)
[7]
范垂本. 齿轮的强度和试验[M]. 北京: 机械工业出版社, 1979: 102―158. Fan Chuiben. The strength and test of the gear [M]. Beijing: Mechanical Industry Press, 1979: 102―158. (in Chinese)
[8]
吴新跃, 朱石坚. 人字齿轮传动的振动理论分析模型 [J]. 海军工程大学学报, 2001, 13(5): 13―19. Wu Xinyue, Zhu Shijian. Theoretical vibration pattern of herringbone gearing [J]. Journal of Naval University of Engineering, 2001, 13(5): 13―19. (in Chinese)
[9]
方宗德. 齿轮轮齿承载接触分析(LTCA)的模型和方法[J]. 机械传动, 1998, 22(2):1―4. Fang Zongde. Model and approach for loaded tooth contact analysis (LTCA) of gear drives [J]. Journal of Mechanical Transmission, 1998, 22(2): 1―4. (in Chinese)
[10]
王峰, 方宗德, 李声晋. 多载荷工况下人字齿轮传动系统振动特性分析[J]. 振动与冲击, 2013, 32(1): 49―52. Wang Feng, Fang Zongde, Li Shengjin. Dynamic characteristics of double helical gear under multi-load cases [J]. Journal of Vibration and Shock, 2013, 32(1): 49―52. (in Chinese)
[11]
邓扬, 李爱群, 丁幼亮. 钢箱梁桥海量应变监测数据分析与疲劳评估方法研究[J]. 工程力学, 2014, 31(7): 69―77. Deng Yang, Li Aiqun, Ding Youliang. Analysis of monitored mass strain data and fatigue assessment for steel box girder bridges [J]. Engineering Mechanics, 2014, 31(7): 69―77. (in Chinese)
[12]
Baek S H, Cho S S, Joo W S. Fatigue life prediction based on the rainflow cycle counting method for the end beam of a freight car bogie [J]. International Journal of Automotive Technology, 2008, 9(1): 95―101.
[13]
李戈, 秦权, 董聪. 用遗传算法选择悬索桥监测系统中传感器的最优布点[J]. 工程力学, 2000, 17(1): 25―34. Li Ge, Qin Quan, Dong Cong. Optimal placement of sensors for monitoring systems on suspension bridges using genetic algorithms [J]. Engineering Mechanics, 2000, 17(1): 25―34. (in Chinese)
