Ng A K F, Deng K, Grondin G Y, Driver R G. Behavior of transverse fillet welds :Experimental program [J]. Engineering Journal, AISC, 2003, 41(2): 39―54.
[2]
Logan J Callele, Robert G. Driver, Gilverty. Grondin. design and behavior of multi-orientation fillet weld connections [J]. Engineering Journal, 2009, 4 : 257―271.
[3]
Bowman M D, Quimn B P. Examination of fillet weld strength [J]. Engineering Journal, AISC, 1994, 31(3): 98―108.
[4]
Brennan F P, Peleties P, Hellier A K. Predicting weld to stress concentration factors for T and skewed T-joints plate connection [J]. International Journal of Fatigue, 2000, 22(7): 573―584.
[5]
李茂华, 侯建国. 国内外钢结构设计规范关于角焊缝的限制及计算方法[J]. 钢结构, 2005, 20(77): 65―67. Li Maohua, Hou Jianguo. Comparatively study on limitations and calculating methods of fillet weld in steel structure design both at home and abroad [J]. Steel Construction, 2005, 20(77): 65―67. (in Chinese)
[6]
孙红. 多向角焊缝节点受力性能和设计方法研究[D]. 西安: 西安建筑科技大学, 2002: 26―31. Sun Hong. Studies on behavior and design of multi-orientation fillet weld connections [D]. Xi’an: Xi’an University of Architechture and Technology, 2002: 26―31. (in Chinese)
[7]
DL/T5154-2002, 架空送电线路杆塔结构设计技术规定[S]. 北京: 中国电力出版社, 2002. DL/T 5154-2002, Technical regulation of design for tower and pole structures of overhead transmission line [S]. Beijing: China Electric Power Press, 2002. (in Chinese)
[8]
GB 50117-2003, 钢结构设计规范[S]. 北京: 中国计划出版社, 2003. GB 50117-2003, Code for design of steel structures [S]. Beijing: China Planning Press, 2003. (in Chinese)
[9]
高湛, 余欢, 李华. 500kV变电架构中刚性、柔性法兰的有限元分析[J]. 电力建设, 2008, 29(2): 32―36. Gao Zhan, Yu Huan, Li Hua. FE analysis of rigid and flexible flanges in 500kV substation trusses [J]. Electric Power Construction, 2008, 29(2): 32―36. (in Chinese)
[10]
班慧勇, 施刚, 石永久, 王元清. 超高强度钢材焊接截面残余应力分布研究[J]. 工程力学, 2008, 25(增刊 II) : 57―61. Ban Huiyong, Shi Gang, Shi Yongjiu, Wang Yuanqing. Study on the residual stress distribution of ultra-high- strength-steel welded sections [J]. Engineering Mechanics, 2008, 25(Suppl II): 57―61. (in Chinese)
