Chajes A, Britvec S J, Winter G. Effect of cold straining on structural sheet steels [J]. Journal of the Structural Division, ASCE, 1963, 89(4): 1―32.
[2]
Karren K W. Corner properties of cold-formed steel shapes [J]. Journal of the Structural Division, ASCE, 1967, 93(1): 401―432.
[3]
Karren K W, Winter G. Effect of cold-forming on light-gauge steel members [J]. Journal of the Structural Division, ASCE, 1967, 93(1): 433―469.
[4]
Coetsee J S, Van den Berg G J, Van der Merwe P. The effect of work hardening and residual stresses due to cold working of forming on the strength of cold-formed stainless steel lipped channel section [C]. Proceedings of the Tenth International Specialty Conference on Cold-Formed Steel Structures. St. Louis, Missouri, USA: Missouri University of Science and Technology 1990, October 23-24, 143―162.
[5]
Abdel-Rahman N, Sivakumaran K S. Material Properties model for analysis of cold-formed steel members [J]. Journal of Structural Engineering, ASCE, 1997, 123(9): 1135―1143.
[6]
Key P W, Hasan S W, Hancock G J. Column behavior of cold-formed hollow section [J]. Journal of Structural Engineering, ASCE, 1998, 114(2): 390―407.
Li Liming, Jiang Xinliang, Chen Zhihua, Li Ning. Strain hardening of thick-walled cold formed steel tube [J]. Journal of Tianjin University, 2008, 41(1): 85―91. (in Chinese)
Hu Shengde, Li Lixin, Zhou Jialin, Zhang Heng, Huang Ning. Comparative analysis on strain hardening of thick-wall cold formed steel tube with square and rectangular hollow section [J]. Journal of Materials Science & Engineering, 2010, 28(1): 76―80. (in Chinese)
Hu Shengde, Li Lixin, Zhou Xuchang, Chang Qingming, Zhang Heng. Strain hardening of cold formed thick-wall square steel tube of 250mm×250mm×9.2mm [J]. Engineering Mechanics, 2010, 27(1): 172―177. (in Chinese)
[13]
JG/T 178-2005, 建筑结构用冷弯矩形钢管[S]. 北京: 中国标准出版社, 2005.
[14]
JG/T 178-2005, Cold-formed steel hollow sections for building structures [S]. Beijing: China Standard Press, 2005. (in Chinese)
[15]
GB/T 228-2002, 金属材料室温拉伸方法[S]. 北京: 中国标准出版社, 2002.
[16]
GB/T 228-2002, Metallic material tensile testing at ambient temperature [S]. Beijing: China Standard Press, 2002. (in Chinese)
[17]
Key P W, Hancock G J. A theoretical investigation of the column behavior of cold-formed square hollow section [J]. Thin-Walled Structures, 1993, 16: 31―64.
