全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
工程力学  2015 

基于贝叶斯理论的钢筋混凝土框架中节点抗剪强度计算

, PP. 167-174

Keywords: 钢筋混凝土,中节点,贝叶斯理论,试验数据库,抗剪模型

Full-Text   Cite this paper   Add to My Lib

Abstract:

我国现行设计规范中钢筋混凝土框架中节点抗剪强度计算为半经验半理论计算公式,由于试验数据的有限性和钢筋混凝土材料的离散性,规范建议公式缺乏明确的理论模型。该文以贝叶斯动态信息更新思路,根据主观经验信息选定先验模型,将国内外已完成101组钢筋混凝土框架中节点试件的试验结果作为数据库,应用贝叶斯参数估计方法综合两类信息进行推断,建立了基于贝叶斯理论的多元线性钢筋混凝土中节点抗剪强度概率模型,进而采用贝叶斯后验模型参数剔除理论,剔除影响节点抗剪强度的次要因素,对概率模型进行动态更新,得到中节点抗剪强度简化模型,并将抗剪模型计算值与试验值和美国ACI352R-02中钢筋混凝土节点抗剪强度的计算公式进行了对比。研究表明:贝叶斯方法继承了先验信息的完备性和大量试验数据的准确性,建议的中节点贝叶斯概率抗剪模型与试验值吻合良好,且较规范值能够更准确地预测钢筋混凝土中节点抗剪强度,可用于该类节点的抗剪强度计算。

References

[1]  Gardoni P, Kiureghian A D, Mosalam K M. Probabilistic capacity models and fragility estimates for reinforced concrete columns based on experimental observations [J]. Journal of Engineering Mechanics, ASCE, 2002, 128(10): 1024―1038.
[2]  Sasani M. Life-safety and near-collapse capacity models for seismic shear behavior of reinforced concrete columns [J]. ACI Structural Journal, 2007, 104(1): 30―38.
[3]  易伟建, 周云, 李浩. 基于贝叶斯统计推断的框架结构损伤诊断研究[J]. 工程力学, 2009, 26(5): 121―128. Yi Weijian, Zhou Yun, Li Hao. Damage assessment research on frame structures based on Bayesian statistical inference [J]. Engineering Mechanics, 2009, 26(5): 121―128. (in Chinese)
[4]  吴涛, 刘喜, 邢国华. 基于贝叶斯理论的钢筋混凝土柱受剪承载力计算[J]. 工程力学, 2013, 30(5): 195―201. Wu Tao, Liu Xi, Xing Guohua. Study on the shear capacity of reinforced concrete column based on Bayesian theory [J]. Engineering Mechanics, 2013, 30(5): 195―201. (in Chinese)
[5]  张尧庭. 贝叶斯统计推断[M]. 北京: 科学出版社, 1991: 1―3. Zhang Yaoting. Bayesian Statistical Inference [M]. Beijing: Science Press, 1991: 1―3. (in Chinese)
[6]  Junho Song, Kang Won-Hee. Probabilistic shear strength models for reinforced concrete beams without shear reinforcement [J]. Journal of Engineering Mechanics, 2010, 34(1): 15―38.
[7]  Kim J, LaFave M. Key influence parameters for the joint shear behavior of reinforced concrete beam-column connections [J]. Engineering Structures, 2007, 29(12): 2523―2539.
[8]  Abrams D P. Scale relations for reinforced concrete beam-column joints [J]. ACI Structural Journal, 1987, 84(6): 502―512.
[9]  Endoh T, Kamura T, Otani S, Aoyama H. Behavior of reinforced concrete beam column connections using light-weight concrete [J]. Transactions of Japan Concrete Institute, 1991, 13: 319―326.
[10]  Higashi, Ohwada Y. Failing behaviors of reinforced concrete beam-column connections subjected to lateral load [J]. Memories of Faculty of Technology Tokyo Metropolitan University, Tokyo, Japan, 1969, 19: 91―101.
[11]  Hayashi M, Teraoka M, Mollick A A, Kanoh Y. Bond properties of main reinforcing bars and restoring force characteristics in RC interior beam-column subassemblages using high strength materials [C]// Proceedings of the 2nd US-Japan-New Zealand-Canada Multilateral Meeting on Structural Performance of High Strength Concrete in Seismic Regions. Honolulu, Hawaii, Japan Concrete Institute, 1994: 15―27.
[12]  Joh O, Goto Y, Shibata T. Influence of transverse joint and beam reinforcement and relocation of plastic hinge region on beam column joint stiffness deterioration [C]// Proceedings of the Design of Beam-Column Joints for Seismic Resistance, SP123. ACI Structural Journal, 1991: 187―224.
[13]  Meinheit D F, Jirsa J O. The shear strength of reinforced concrete beam-column joints [R]. Technical Report CESRL Report No.77-1, University of Texas, Austin, 1977.
[14]  Noguchi H, Kashiwazaki T. Test on high-strength concrete interior beam-column joints [C]// Proceedings of the 10th World Conference on Earthquake Engineering. Madrid, Spain, AA Balkema, Rotterdam, 1992: 3163―3168.
[15]  Oka K, Shiohara H. Test on high-strength concrete interior beam-column subassemblage [C]// Proceedings of the 10th World Conference on Earthquake Engineering. Madrid, Spain, AA Balkema, Rotterdam, 1992: 3211―3217.
[16]  Otani S, Kitayama K, Aoyama H. Reinforced concrete interior beam-column joints under simulated earthquake loading [C]. Proceedings of US-New Zealand-Japan Seminar on Design of Reinforced Concrete Beam-Column Joints. Monterey: New Zealand National Society Earthquake, 1984: 48―62.
[17]  Teraoka M, Kanoh Y, Hayashi K, Sasaki S. Behavior of interior beam-and-column subassemblages in an RC frame [C]// Proceedings of the 1st International Conference on High Strength Concrete. Kona, Hawaii, Japan Concrete Institute, 1997: 93―108.
[18]  Teraoka M, Kanoh Y, Tanaka K, Hayashi K. Strength and deformation behavior of RC interior beam-and-column joints using high strength concrete [C]// Proceedings of the 2nd US-Japan-New Zealand-Canada Multilateral Meeting on Structural Performance of High Strength Concrete in Seismic Regions. Honolulu, Hawaii, Japan Concrete Institute, 1994: 1―14.
[19]  傅剑平. 钢筋混凝土框架节点抗震性能与设计方法研究[D]. 重庆: 重庆大学, 2002. Fu Jianping. Seismic behavior and design method of reinforced concrete frame joints [D]. Chongqing: Chongqing University, 2002. (in Chinese)
[20]  傅剑平, 陈小英, 陈滔, 等. 中低剪压比框架节点抗震机理的试验研究[J]. 重庆建筑大学学报, 2005, 27(1): 41―47. Fu Jianping, Chen Xiaoying, Chen Tao, et al. Test on the seismic mechanism of frame joints of low shear compression ratio [J]. Journal of Chongqing Jianzhu University, 2005, 27(1): 41―47. (in Chinese)
[21]  框架节点专题研究组. 低周反复荷载作用下钢筋混凝土框架梁柱节点核心区抗剪强度的试验研究[J]. 建筑结构学报, 1983, 4(6): 1―17. Research group on frame joints. Experimental study on shear strength of reinforced concrete beam-column joints under low cyclic loads [J]. Journal of Building Structures, 1983, 4(6): 1―17. (in Chinese)
[22]  赵成文, 张殿惠, 王天锡, 等. 反复荷载下高强混凝土框架内节点抗震性能试验研究[J]. 沈阳建筑工程学院学报, 1993, 9(3): 260―268. Zhao Chengwen, Zhang Dianhui, Wang Tianxi, et al. Experimental study on seismic performance of high-strength concrete frame joints under cyclic loads [J]. Journal of Shenyang Institute of Architecture and Engineering, 1993, 9(3): 260―268. (in Chinese)
[23]  ACI-ASCE Committee 352. Recommendations for design of beam-column connections in monolithic reinforced concrete structures (ACI 352R-02) [S]. ACI Structural Journal, 2002.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133