全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

纤维堆积体厚度方向浸渗特性

, PP. 83-88

Keywords: 复合材料,浸润,纤维,树脂,毛细作用

Full-Text   Cite this paper   Add to My Lib

Abstract:

使用自行设计的夹具对纯树脂沿纤维织物厚度方向的毛细浸渗行为进行了初步研究。通过改变温度、纤维体积分数、纤维类型以及铺层方式,研究了树脂对纤维织物的毛细浸渗规律,并研究了纤维表面浸润剂的影响。结果表明:升高温度和减小纤维含量均有利于提高浸渗速率;而铺层方式的改变对浸渗规律的影响甚小。

References

[1]  李 敏,张佐光,孙志杰,等.单向纤维集束的环氧树脂浸润曲线实验分析 .见:第十三届全国复合材料学术会议论文集 .北京:航空工业出版社,2004.1070-1074.
[2]  Labajos-Broncano L, Gonz'alez-Martín M L, Bruque J M, et al. On the use of Washburn’s equation in the analysis of weight-time measurements obtained from imbibition experiments [J]. Journal of Colloid and Interface Science, 1999, 219: 275-281.
[3]  Labajos-Broncano L, Gonz'alez-Martín M L, Bruque J M, et al. Influence of the meniscus at the bottom of the solid plate on imbibition experiments[J]. Journal of Colloid and Interface Science, 2001, 234 (1) : 79-83.
[4]  Young Wenbin . Capillary impregnation into cylinder banks[J].Journal of Colloid and Interface Science, 2004, 273 (2) : 576-580.
[5]  陈 萍,李宏运,陈祥宝.铺层方式对织物渗透率的影响[J].复合材料学报,2001,18 (1) :30-33. Chen Ping,Li Hongyun,Chen Xiangbao. Effect of layers on permeability[J].Acta Materiae Compositae Sinica, 2001, 18 (1) :30-33.
[6]  路慧玲,朱永全,戴干策.PP/GMT片材骨架材料——玻纤毡[J].复合材料学报,2002,19 (4) :38-41. Lu Huiling,Zhu Yongquan,Dai Gance. PP/GMT sheets reinforcement: Glass fiber mat[J].Acta Materiae Compositae Sinica, 2002, 19 (4) :38-41.
[7]  Labajos-Broncano L, Gonz ' alez-Martín M L, Bruque J M. 图7 环氧618对单向织物的浸润曲线 Fig.7 Comparison of impregnation behavior of epoxy resin 618 in unidirectional cloth beds with and without sizing On the evaluation of the surface free energy of porous and powdered solids from imbibition experiments: Equivalence between height-time and weight-time techniques[J]. Journal of Colloid and Interface Science, 2003,262 (1) : 171-178.
[8]  Pillai Krishna M, Suresh G. Wicking across a fiber-bank[J].Journal of Colloid and Interface Science, 1996, 183: 100-110.
[9]  Batch Gibson L, Chen Yung Tin, Macosko Christopher W. Capillary impregnation of aligned fibrous beds: Experiments and model [J]. Reinforced Plastics and Composites, 1996, 15 (10) : 1027-1051.
[10]  李 铭,黄 进,戴干策.GMT熔融浸渍中熔体在玻纤毡中的流动[J].复合材料学报,2000,17 (3) :28-32. Li Ming,Huang Jin,Dai Gance. Melt flow through glass fiber mat during GMT melt impregnation[J].Acta Materiae Compositae Sinica, 2000, 17 (3) :28-32.
[11]  陈 鹏,段跃新,梁志勇.预成型体纵向渗透率统计模型[J].复合材料学报,2004,21 (2) :105-110. Chen Peng,Duan Yuexin,Liang Zhiyong. Research on the statistical model for the longitudinal permeability of preform[J].Acta Materiae Compositae Sinica, 2004, 21 (2) :105-110.
[12]  章亚东,段跃新,左 璐.经编织物法制备连续纤维增强热塑性复合材料的微观形貌和浸润过程分析[J].复合材料学报,2004,21 (6) :63-69. Zhang Yadong,Duan Yuexin,Zuo Lu. Analysis of microstructure and impregnation process of FRTP composites manufactured from warp-knitting fabric [J].Acta Materiae Compositae Sinica, 2004, 21 (6) :63-69.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133