全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

RTM专用双马来酰亚胺树脂体系化学流变特性

, PP. 56-62

Keywords: 双马来酰亚胺树脂,RTM,工艺,流变特性,粘度模型

Full-Text   Cite this paper   Add to My Lib

Abstract:

进行了RTM工艺专用双马来酰亚胺(BMI)树脂体系的化学流变特性及工艺过程研究。采用DSC热分析技术和粘度测量手段,研究了该树脂体系固化特性以及固化过程中粘度与温度的关系,根据对等温粘度曲线的分析,建立了双阿累尼乌斯粘度模型和工程粘度模型。对比所建立的两种粘度模型,结果显示两种模型都可以适用于RTM工艺注射阶段,工程模型在粘度转折点附近的预测精度要优于双阿累尼乌斯粘度方程。同时建立了恒温温度-凝胶时间之间的数学关系。验证了所建立的工程模型在工程中的实用性,并指出了工程粘度模型的使用范围在固化体系交联结构形成之前,所建立的工程粘度模型能够有效地预测体系RTM工艺的粘度变化和工艺过程,为复合材料成型工艺模拟分析以及工艺参数的准确制定奠定了基础。

References

[1]   丁孟贤, 何天白. 聚酰亚胺新型材料[M] . 北京: 科学出版社, 1998. 32 - 34.Ding M X , Hen T B. Polyimide Materials [M] . Beijing : Science Press , 1998. 32 - 34.
[2]   白永平, 王清民, 王宝湖, 等. BMI 树脂基复合材料研究进展[J] . 纤维复合材料, 1999 , 16 (1) : 48 - 52.Bai Y P , Wang Q M , Wang B H , et al . Research progress ofBMI resin mat rix composites [J] . Fiber Composites , 1999 , 16(1) : 48 - 52.
[3]   徐佩弦. 高聚物流变学及应用[M] . 北京: 化学工业出版社,2003. 13 - 30.Xu P X . Rheology of Polymer and Application [M] . Beijing :Chemical Indust ry Press , 2003. 13 - 30.
[4]   张佐光, 扎姆阿茹娜, 任 骞, 等. 复合材料热压成型过程环氧树脂流变特性研究[J] . 航空学报, 2004 , 25 (3) :312 - 316.Zhang Z G, Zhamu Aruna , Ren Q , et al . Research on rheological regularity of epoxy resin during composite press molding process [J] . A cta Aeronautica et Ast ronaut ica S inica ,2004 , 25 (3) : 312 - 316.
[5]   Roller M B. Rheology of curing t hermoset s : A review [J] .Pol ym Eng Sci ,1986 , 26 (6) : 432 - 440.
[6]   Gutowski T G. Advanced Composites Manufacturing [M] .New York :John Wiley & Sons Inc , 1997. 393 - 398.
[7]   Kiuna N , Lawrence C J , Fontana Q P V , et al . A model forresin viscosity during cure in t he resin t ransfer mouldingprocess [J] . Composites Part A , 2002 , 33 (11) : 1497 - 1503.
[8]   Maazouz A , Dupuy J , Seyt re G. Polyuret hane and unsaturated polyester hybrid networks : Chemorheological and dielect ricstudy for t he resin t ransfer molding process ( RTM) [J] .Pol ym Eng Sci , 2000 , 40 (3) : 690 - 701.
[9]   Yousefi A , Lafleur P G, Gauvin R. Kinetic studies of t hermoset cure reactions : A review [J] . Pol ym Compos , 1997 , 18(2) : 157 - 168.
[10]  Tungare A V , Martin G C , Got ro J T. Chemorheologicalcharacterization of t hermoset cure [J] . Pol ym Eng Sci ,1988 , 28 (16) : 1071 - 1075.
[11]  石 凤, 段跃新, 梁志勇, 等. 双酚A 型环氧树脂/ 催化型固化剂体系的粘度模型研究[J] . 复合材料学报, 已录用.Shi F , Duan Y X , Liang Z Y, et al . An engineering viscositymodel for bisphenol : A epoxy resin/ catalytic curing agent system [J] . Acta Materiae Compositae S inica , accepted.
[12]  Ya Malkin A , Kulichikhin S G, Kerber M L , et al . Rheokinetics of curing of epoxy resins near t he glass t ransition [J] .Pol ym Eng Sci , 1997 , 37 (8) : 1322 - 1330.
[13]  Lazaa J M , J uliana C A , Larraurib E , et al . Thermal scanningrheometer analysis of curing kinetic of an epoxy resin2 : Anamine as curing agent [J] . Pol ymer , 1999 , 40 (1) : 35 - 45.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133