关长文, 陈浩然, 郑长良, 等. 复合材料和结构机械连接件破坏历程的数值模拟与试验验证 [J]. 航空学报, 1995, 16(2): 143-147. Guan Changwen, Chen Haoran, Zheng Changliang, et al. Numerical simulation and experimental verification of failure process and load-carrying capacity for mechanically fastened joints in composite materials and structures [J]. Acta Aeronautica et Astronautica Sinica, 1995, 16(2): 143-147.
[8]
陈鹏飞, 赵美英. 基于单层特征曲线法的复合材料机械连接接头强度分析 [J]. 强度与环境, 2008, 35(4): 45-50. Chen Pengfei, Zhao Meiying. Strength analysis method of composite mechanical joint by using the ply characteristic curve method [J]. Structure & Environment Engineering, 2008, 35(4): 45-50.
[9]
佘 凯, 许 建, 黄国兵, 等. 复合材料螺栓连接结构数值模拟研究 [J]. 中国舰船研究, 2008, 3(6): 41-44. She Kai, Xu Jian, Huang Guobing, et al. Numerical simulation study on composite bolt-joint structure [J]. Chinese Journal of Ship Research, 2008, 3(6): 41-44.
[10]
张 爽, 王 栋, 郦正能, 等. 基于ANSYS的复合材料层合板单钉连接件参数化结构仿真 [J]. 航空学报, 2006, 27(6): 1088-1091. Zhang Shuang, Wang Dong, Li Zhengneng, et al. Parameterized simulation for composite laminates with single mechanically fastened joint based on ANSYS [J]. Acta Aeronautica et Astronautica Sinica, 2006, 27(6): 1088-1091.
[11]
Oualid L, Gilles F. Ultimate strength of pin-loaded composite laminates: A limit analysis approach [J]. Composite Structures, 2011, 93: 1217-1224.
