Bai J, Seeleuthner P, Bormpard P. Mechanical behavior of ±55° filament wound glass fiber/epoxy-resin tube:Ⅰ. micro structural analyses, mechanical behavior and damage mechanisms of composite tubes under pure tensile loading, pure internal pressure, and combined loading[J]. Composites Science and Technology, 1997, 57(2): 141-153.
[2]
Caroll M, Ellyin F, Kujawski D, et al. The rate-dependent behavior of ±55° filament wound glass fiber/epoxy tubes under biaxial loading[J]. Composites Science and Technology, 1995, 55(4): 391-403.
[3]
Mertiny P, Ellyin F, Hothan A. An experimental investigation on the effect of multi-angle filament winding on the strength of tubular composite structures[J]. Composites Science and Technology, 2004, 64(1): 1-9.
[4]
Martens M, Ellyin F. Biaxial monotonic behaviors of a multidirectional glass fiber epoxy pipes[J]. Composites Part A: Applied Science and Manufacturing, 2000, 31(9): 1001-1014.
[5]
Hu G, Bai J B, Demianouchko E, et al. Mechanical behavior of ±55° filament wound glass-fibre epoxy-resin tubes III: Macro mechanical mode macroscopic behavior of tubular structures with damage and failure envelope prediction[J]. Composites Science and Technology, 1998, 58(1): 19-29.
[6]
Xia M, Takayanagi H, Kemmochi K. Analysis of multi-layered filament-wound composite pipes under internal pressure[J]. Composite Structures, 2001, 53(4): 483-491.
[7]
Martins L A L, Bastian F L, Netto T A. Structural and functional failure pressure of filament wound composite tubes[J]. Materials & Design, 2012, 36: 779-787.
[8]
Martins L A L, Bastian F L, Netto T A. The effect of stress ratio on the fracture morphology of filament wound composite tubes[J]. Materials & Design, 2013, 49: 471-484.
[9]
Jia X L, Chen G, Yu Y H, et al. Effect of geometric factor, winding angle and precrack angle on quasi-static crushing behavior of filament wound CFRP cylinder[J]. Composite Part B: Engineering, 2013, 45(1): 1336-1343.
[10]
Arikan H. Failure analysis of (±55°)3 filament wound composite pipes with an inclined surface crack under static internal pressure[J]. Composite Structures, 2010, 92(1): 182-187.
[11]
Zhou C W, Xia Z H, Yong Q L. Micro mechanical model of filament wound composite pipe with damage analysis[C]//Proceedings of 2006 ASME Pressure Vessels and Piping Division Conference. Vancouver, BC, Canada: American Society of Mechanical Engineers, 2006: 66-74.
[12]
Morozov E V. The effect of filament winding mosaic patterns on the strength of thin-walled composite shells[J]. Composite Structures, 2006, 76(1-2): 123-129.
[13]
Rousseau J, Perreux D, Verdiere N. The influence of winding patterns on the damage behavior of filament wound pipes[J]. Composites Science and Technology, 1999, 59(9): 1439-1449.
[14]
Hernandez-Moreno H, Douchin B, Collombet F, et al. Influence of winding pattern on the mechanical behavior of filament wound composite cylinders under external pressure[J]. Composites Science and Technology, 2008, 68(3-4): 1015-1024.
[15]
Wen W D, Li J, Cui H T, et al. Macro and micro investigation of internal structure of filament wound composite[J]. Advanced Materials Research, 2012, 396-398: 367-371.
[16]
郭章新,韩小平,朱西平, 等. 纤维束交叉起伏对缠绕复合材料刚度的影响[J]. 复合材料学报, 2010, 27(1): 179-184. Guo Zhangxin, Han Xiaoping, Zhu Xiping, et al. Calculating stiffness of filament winding composite for considering the filament undulation and crossover[J]. Acta Materiae Compositae Sinica, 2010, 27(1): 179-184.
[17]
Wen W D, Li J, Cui H T, et al. Strain characteristic of filament wound composite cylinder under axial loading[J]. Advanced Materials Research, 2012, 415-417: 395-398.
[18]
李俭, 温卫东, 崔海涛. 基于傅里叶级数的缠绕复合材料刚度预测方法[J].复合材料学报, 2008, 25(5): 169-174. Li Jian, Wen Weidong, Cui Haitao. Predicting stiffness of filament-wound composite based on Fourier series[J]. Acta Materiae Compositae Sinica, 2008, 25(5): 169-174.
[19]
李俭, 温卫东, 崔海涛, 等. 基于细观刚度模型的缠绕复合材料有限元分析方法[J]. 航空学报, 2009, 30(7): 1236-1242. Li Jian, Wen Weidong, Cui Haitao, et al. Finite element method for structure analysis of filament wound composite based on micro stiffness model[J]. Acta Aeronautica et Astronautica Sinica, 2009, 30(7): 1236-1242.
[20]
Hashin Z.Failure criteria for unidirectional fiber composites[J].Journal of Applied Mechanics, 1980, 47(2): 329-335.
