|
|
- 2015
热塑性树脂连续浸渍过程的纤维断裂机制及实验
|
Abstract:
利用自行设计的浸渍模具, 通过拉挤熔融浸渍工艺, 定量考察了牵引速度、熔体温度和浸渍辊个数等工艺参数对连续玻璃纤维增强热塑性复合材料复合过程中纤维断裂的影响, 旨在通过所建立的纤维断裂数学模型, 预测预浸料生产过程中纤维断裂率并描述实验结果。 结果表明: 模型与实验数据吻合较好, 能够为工业化生产提供指导与借鉴; 纤维束在模具中拖曳而产生的黏性剪切作用是影响纤维断裂的主要因素, 适当减少浸渍辊数及采用低黏度树脂能够显著降低纤维断裂,提高工艺稳定性。 Though the homemade impregnation mold, the effects of processing parameters such as roving pulling speed, melt temperature and number of pins on fiber fracture of continuous glass fiber reinforced thermalplastic composites were studied quantitatively in compound process. A fiber fracture mathematical model was developed for producing prepreg process to predict the fiber fracture rate and describe the experimental results. The results suggest that the model and experimental data are in good agreement. The model can provide guidance and reference for industrial production. The fiber fracture is mainly caused by viscous shear effect on fiber bundle when pulling the fiber bundle. Reducing the number of impregnation pins and using low-viscosity resin can significantly ease the fiber fracture, as well aspromote the process stability.
| [1] | Xing L Y, Jiang S C, Zhou Z G. Progress of manufacturing technology development of advanced polymer matrix composites[J]. Acta Matreiae Compositae Sinica, 2013, 30(2): 1-9 (in Chinese). 邢丽英, 蒋诗才, 周正刚.先进树脂基复合材料制造技术进展[J].复合材料学报, 2013, 30(2): 1-9. |
| [2] | Chinese Bureau of Building Materials Industry.GB/T 7690.1—2001 Reinforcements—test method for yarns Part 1:Determination of linear density[S].Beijing: Standards Press of China, 2001 (in Chinese). 中国建筑材料工业局.GB/T 7690.1—2001 增强材料——纱线试验方法第一部分: 线密度的测定[S].北京: 中国标准出版社, 2001. |
| [3] | Fang L, Zhou X D. The stability of continuous glass fiber reinforced polypropylene pultruded rods[J]. Fiber Reinforced Plastics/Composites, 2013(9): 13-16 (in Chinese). 方立, 周晓东.连续纤维增强聚丙烯拉挤棒材的性能稳定性[J].玻璃钢/复合材料, 2013(9): 13-16. |
| [4] | Bates P J, Charrier J M. Pulling tension monitoring during the melt impregnation of glass roving[J]. Polymer Composites, 2000, 21(1): 104-113 |
| [5] | Gurvich M R, Dibenedetto A T. Evaluation of the statistical parameters of a Weibull distribution[J]. Journal of Materials Science, 1997, 32(14): 3711-3716. |
| [6] | Turkovich R, Erwin L. Fiber fracture in reinforced thermoplastic processing[J]. Polymer Engineering & Science, 1983, 23(13): 743-749. |
| [7] | Astrom B T, Pipes R B. A modeling approach to thermoplastic pultrusion.Ⅰ: Formulation of models[J]. Polymer Composites, 1993, 14(3): 173-183. |
| [8] | Srinivasagupta D, Potaraju S, Kardos J L, et al. Steady state and dynamic analysis of a bench-scale injected pultrusion process[J]. Composites Part A: Applied Science and Manufacturing, 2003, 34(9): 835-846. |
| [9] | Durin A, De Micheli P, Ville J. A matricial approach of fibre breakage in twin-screw extrusion of glass fibres reinforced thermoplastics[J]. Composites Part A: Applied Science and Manufacturing, 2013, 48: 47-56. |
| [10] | R' Mili M, Bouchaour T, Merle P. Estimation of weibull parameters from loose-bundle tests[J]. Composites Science and Technology, 1996, 56(7): 831-834. |
| [11] | China Building Material Federation.GB/T 1463—2005 Test methods for density and relative density of fiber reinforced plastics[S].Beijing: Standards Press of China, 2005 (in Chinese). 中国建筑材料工业协会.GB/T 1463—2005 纤维增强塑料密度和相对密度试验方法[S].北京: 中国标准出版社, 2005. |
| [12] | Tian Z S, Liu D W, Li G, et al. Research progress of continuous fiber reinforced thermoplastic prepregs[J]. Fiber Reinforced Plastics/Composites, 2012(7): 53-58 (in Chinese). 田振生, 刘大伟, 李刚, 等.连续纤维增强热塑性树脂预浸料的研究进展[J].玻璃钢/复合材料, 2012(7): 53-58. |
| [13] | Du S Y. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007, 24(1):1-12 (in Chinese). 杜善义.先进复合材料与航空航天[J].复合材料学报, 2007, 24(1): 1-12. |
| [14] | Yun M S, Lee W L. Analysis of pulling force during pultrusion process of phenolic foam composites[J]. Composites Science and Technology, 2008, 68(1): 140-146. |
| [15] | China Building Material Federation.GB/T 2577—2005 Test method for resin content of glass fiber reinforced plastics[S]. Beijing: Standards Press of China, 2005 (in Chinese). 中国建筑材料工业协会.GB/T 2577—2005 玻璃纤维增强塑料树脂含量测试方法 [S].北京: 中国标准出版社, 2005. |
