李金泉, 丁洪生, 付铁, 等. 并联机床的历史、现状及展望[J]. 机床与液压, 2003(3): 3-8. Li Jinquan, Ding Hongsheng, Fu Tie, et al. The parallel maching tool's history、status and prospect[J]. Machine Tool and Hydraulic Pressure, 2003(3): 3-8.
[2]
杜兆材, 余跃庆, 苏丽颖. 动平台惯性参数对柔性并联机构动力学特性的影响及优化设计[J]. 光学精密工程, 2006, 14(6): 1009-1016. Du Zhaocai, Yu Yueqing, Su Liying. Effects of inertia parameters of moving platform on dynamic characteristic of flexible parallel mechanism and optimal design[J]. Optic and Precision Engineer, 2006, 14(6): 1009-1016.
[3]
郭磊, 廖启征, 魏世民. 自行车机器人动力学建模与MIMO反馈线性化[J]. 北京邮电大学学报, 2007, 30(1): 84-85. Guo Lei, Liao Qizheng, Wei Shimin. Dynamic modeling of bicycle robot and nonlinear control based on feedback linearization of MIMO Systems[J]. Journal of Beijing University of Posts and Telecommunications, 2007, 30(1): 84-85.
[4]
刘善增, 余跃庆, 杜兆材, 等. 并联机器人的研究进展与现状[J]. 组合机床及自动化加工技术, 2007(7): 4-10. Liu Shanzeng, Yu Yueqing, Du Zhaocai, et al. Recent development and current status of parallel manipulators[J]. Modular Machine Tool and Automatic Manufacturing Technique, 2007(7): 4-10.
[5]
Ju F, Choo Y S, Cui F S. Dynamic response of tower crane induced by the pendulum motion of the payload[J]. Int J Solids Structures, 2006, 43(2): 376-389.
[6]
李金泉, 丁洪生, 付铁, 等. BKX-Ⅰ型并联机床的实验模态分析. 制造技术与机床, 2004(10): 45-48. Li Jinquan, Ding Hongsheng, Fu Tie, et al. The experimental modal analysis of the BKX-Ⅰ model PKM[J]. Manufacturing Technology and Machine Tool, 2004(10): 45-48.
