The thermal
stability and decomposition kinetics of polysuccinimide (PSI) were investigated using analyzer DTG-60 under
high purity nitrogen atmosphere at different heating rates (3, 6, 9, 12 K/min). The thermal decomposition
mechanism of PSI was determined by Coats-Redfern method. The kinetic parameters
such as activation energy (E), pre-exponential
factor (A) and reaction order (n) were calculated by Flynn-Wall-Ozawa
and Kissinger methods. The results show that the thermal decomposition of PSI
under nitrogen atmosphere mainly occurs in the temperature range of 619.15-693.15K, the reaction order (n)
was,
the activation energy (E) and
pre-exponential factor (A) were obtained
to be 106.585 kJ/mol and 4.644×109 min-1, the integral and differential
forms of the thermal decomposition mechanism of PSI were found to be and
References
[1]
A. W. Yang, G. P. Cao and M. H. Zhang, “Synthesis of Polysuccinimide and Determination of the Intrinsic Viscosity,” Polymer Materials Science & Engineering, Vol. 26, 2010, pp. 4-7.
[2]
J. H. Jeong, H. S. Kang, S. R. Yang and J. D. Kim, “Polymer Micelle-Like Aggregates of Novel Amphiphilic Biodegradable Poly(Asparagine) Grafted with Poly(Caprolactone),” Polymer, Vol. 44, No. 3, 2003, pp. 583-591. http://dx.doi.org/10.1016/S0032-3861(02)00816-9
[3]
A. Rotaru, M. Anca, G. Popa, P. Rotaru and E. Segal, “Non-Isothermal Kinetics of 2-Allyl-4-((4-(4-Methylbenzyloxy)Phenyl) Diazenyl) Phenol in Air Flow,” Journal of Thermal Analysis and Calorimetry, Vol. 97, No. 2, 2009, pp. 485-491. http://dx.doi.org/10.1007/s10973-009-0214-1
[4]
H. E. Kissinger, “Variation of Peak Temperature with Heating Rate in Different Rate in Differential Thermal Analysis,” Journal of Research of the National Bureau of Standards, Vol. 57, No. 4, 1956, pp. 217-221. http://dx.doi.org/10.6028/jres.057.026
[5]
H. E. Kissinger, “Reaction Kinetic in Differential Thermal Analysis,” Analytical Chemistry, Vol. 29, No. 11, 1957, pp. 1702-1706. http://dx.doi.org/10.1021/ac60131a045
[6]
E. S. Freeman and B. Carroll, “The Application of Thermoanalytical Technique to Reaction Kinetics,” Journal of Physical Chemistry, Vol. 3, 1958, pp. 394-397.
[7]
H. L. Friedman, “Kinetics and Gaseous Products of Thermal Decomposition of Polymers,” Journal of Macromolecular Science: Part A—Chemistry, Vol. 1, No. 1, 1967, pp. 57-59. http://dx.doi.org/10.1080/10601326708053917
[8]
A. W. Coats and J. P. Redfern, “Kinetic Parameters from Thermogravimetric Data,” Nature, Vol. 201, 1964, pp. 68-69. http://dx.doi.org/10.1038/201068a0
[9]
C. R. Zhou, Q. H. Li and H. F. Wang, “Thermal Analysis for the Thermal Decomposition of Methylsulfonate Tin,” Journal of Chemical Engineering of Chinese Universities, Vol. 20, 2006, pp. 669-672.
[10]
C. R. Zhou, X. H. Shi, H. F. Wang and D. G. Jiang, “Thermal Decomposition and the Non-Isothermal Decomposition Kinetics of DL-2-Naproxen,” Journal of Chemical Engineering of Chinese Universities, Vol. 25, 2011, pp. 442-446.
[11]
L. G. Lu, Q. Zhang, X. N. Xu, X. L. Dong and D. W. Wang, “Thermal Degradation Kinetics of Novel Intumescent Flame Retardant Polypropylene,” China Plastics, Vol. 23, 2009, pp. 53-60.
[12]
C. Y. Ou, C. H. Zhang, S. D. Li, L. Yang and J. J. Dong, “Thermal Degradation Kinetics of Chitosan-Cobalt Complex as Studied by Thermogravimetric Analysis,” Carbohydrate Polymers, Vol. 82, No. 4, 2010, pp. 1284-1289. http://dx.doi.org/10.1016/j.carbpol.2010.07.010
[13]
C. D. Doyle, “Kinetic Analysis of Thermogravimetric Data,” Journal of Applied Polymer Science, Vol. 5, No. 15, 1961, pp. 285-292. http://dx.doi.org/10.1002/app.1961.070051506
[14]
T. Ozawa, “Kinetic Analysis of Derivative Curves in Thermal Analysis,” Journal of Thermal Analysis, Vol. 2, No. 3, 1970, pp. 301-310. http://dx.doi.org/10.1007/BF01911411
[15]
F. X. Chen, C. R. Zhou and G. P. Li, “Study on Thermal Decomposition and the Non-Isothermal Decomposition Kinetics of Glyphosate,” Journal of Thermal Analysis and Calorimetry, Vol. 109, No. 3, 2012, pp. 1457-1462.
[16]
Q. F. Wang, L. Wang, X. W. Zhang and Z. T. Mi, “Thermal Stability and Kinetic of Decomposition of Nitrated HTPB,” Journal of Hazardous Materials, Vol. 172, No. 2-3, 2009, pp. 1659-1664. http://dx.doi.org/10.1016/j.jhazmat.2009.08.040
[17]
C. D. Gamlin, N. K. Dutta, N. R. Choudhury, D. Kehoe and J. Matisons, “Evaluation of Kinetic Parameters of Thermal and Oxidative Decomposition of Base Oils by Conventional, Isothermal and Modulated TGA, and Pressure DSC,” Thermochimica Acta, Vol. 392-393, 2002, pp. 357-369. http://dx.doi.org/10.1016/S0040-6031(02)00121-1
[18]
X. Y. Li, Y. Q. Wu, D. H. Gu and F. X. Gan, “Thermal Decomposition Kinetics of Nickel(II) and Cobalt(II) Azo Barbituric Acid Complexes,” Thermochimica Acta, Vol. 493, No. 1-2, 2009, pp. 85-89. http://dx.doi.org/10.1016/j.tca.2009.04.010
[19]
Z. W. Zhou and Q. X. Wu, “Studies on Thermal Properties of Poly(Phenylene Sulfide Amide),” Journal of Applied Polymer Science, Vol. 66, No. 7, 1997, pp. 1227-1230. http://dx.doi.org/10.1002/(SICI)1097-4628(19971114)66:7<1227::AID-APP2>3.0.CO;2-I