In mechanical gear systems, dust,
noise, vibration, and tooth wear are generated by frictions among gear teeth,
and suppressing friction requires lubrication. Magnetic gears transmit torque
by magnetic forces without contact and so avoid contact-related problems. The
present paper discusses magnet arrangements and the shape of stationary gear
teeth to improve transmission torque in surface magnet type magnetic gear
transmission mechanisms.
References
[1]
K. Atallah and D. Howe, “A novel High-Performance Magnetic Gear,” IEEE Transactions on Magnetics, Vol. 37, No. 4, 2001, pp. 2844-2846.
doi:10.1109/20.951324
[2]
K. Atallah, S. D. Calverley and D. Howe, “Design Analysis and Realization of a High-Performance Magnetic Gear,” IEEE Proceedings of Electric Power Applications, Vol. 151, No. 2, 2004, pp. 135-143.
doi:10.1049/ip-epa:20040224
[3]
K. T. Chang, D. Zhang, J. Z. Jiang, C. H. Liu and Y. J. Zhang, “Design of a Magnetic-Geard Outer-Rotor Permanent-Magnet Brushless Motor for Electric Vehicles,” IEEE Transactions on Magnetics, Vol. 43, No. 6, 2007, pp. 2504-2506. doi:10.1109/TMAG.2007.893714
[4]
L. N. Jian, K. T. Chau, Y. Cong, J. Z. Jiang, C. Yu and W. L. Li, “Comparison of Coaxial Magnetic Gears with Different Topologies,” IEEE Transactions on Magnetics, Vol. 45, No. 10, 2009, pp. 4526-4529.
[5]
T. Ikeda, K. Nakamura and W. Ichinokura, “A Way to Improve Efficiency of Permanent-Magnet Magnetic Gears,” Journal of the Magnetic Society of Japan, Vol. 33, No. 2 2009, pp. 130-134. doi:10.3379/msjmag.0901RG8016
[6]
M. Muramatsu, M. Yamamoto and K. Hirata, “Study on a Hybrid Magnetic Gear,” 20th Symposium on Electromagnetics and Dynamics, 2008, pp. 77-80.
[7]
M. Yamamoto, K. Hirata and M. Muramatsu, “Study of a New Magnetic Gear,” Transaction of Japan Society of Applied Electromagnetics and Mechanics (AEM), Vol. 17, No. 2, 2009, pp. 188-193.
[8]
P. O. Rasmussen, T. O. Andersen, F. T. Jorgensen and O. Nielsen, “Development of a High-Performance Magnetic Gear,” IEEE Transactions on Industry Applications, Vol. 41, No. 3, 2005, pp. 764-770.
doi:10.1109/TIA.2005.847319
[9]
Hitachi, Neomax Engineering, “Development of High Torque Gear (Beat-Max).”
http://www.hitachi-metals.co.jp/press/news/2011/n0721.htm
[10]
T. Fujita, Y. Ando, K. Nagaya, M. Enokizono, T. Todaka and K. Sugiura, “Evaluation Test on Prototype Surface Magnetic Gears with Magnetic Flux Concentration and Normal Magnet Arrangement for Practical Use,” Proceedings of Symposium on Electromagnetics and Dynamics, Nagoya, 2011, pp. 86-91.
[11]
K. Halbach, “Design of Permanent Multipole Magnets with Oriented Rare Earth Cobalt Materials,” Nuclear Instruments Methods, Vol. 169, No. 1, 1980, pp. 1-10.
doi:10.1016/0029-554X(80)90094-4
