All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

Sustainable Construction & Design

ISSN Print: 2032-7471

ISSN Online:

Website: http://www.scad.ugent.be/journal.shtml

Share:




Go

Conceptual design of a fretting fatigue testing device

orms, N.,De Schamphelaere, D.,De Pauw, J.,De Baets, P.

Investigation of friction hysteresis using a laboratory-scale tribometer

Neis, Patric Daniel,De Baets, Patrick,Perez Delgado, Yeczain,Ferreira, N.F.

Design characteristics that improve the fatigue life of threaded pipe connections

Van Wittenberghe, Jeroen,De Baets, Patrick,De Waele, Wim,Galle, Timothy

Degradation of carbon reinforced epoxy composites under sliding in ambient air

Dhieb, H.,Buijnsters, J.G.,Celis, J.P.

Tribological behavior of composite-steel on rolling/sliding contacts for various loads

Ando, M.,Sukumaran, Jacob

Wear of conveyor chains with polymer rollers

erremans, V.,Rolly, T.,De Baets, P.,De Pauw, J.

Metaheuristics in architecture

Strobbe, T.,Pauwels, P.,Verstraeten, R.,De Meyer, R.

Turning specialities of ZrO2 ceramics

Fledrich, G.,Palinkas, I.,Keresztes, R.,Zsidai, L.

Fluid mechanical aspects of open- and closed-toe flue organ pipe voicing

Steenbrugge, D.

Analytical and computational estimation of patellofemoral forces in the knee under squatting and isometric motion

Fekete, Gusztav,Malnasi Csizmadia, B.,Wahab, M.A.,De Baets, Patrick

Development environment for haptic feedback device on mobile agricultural equipment

Janosi, L.,Kis, J.

Novel cylinder positioning system realised by using solenoid valves

Foldi, L.,Beres, Z.,Sarkozi, E.

Height-independent topographic parameters of worn surfaces

Baranyi, I.,Czifra, A.,Kalacska, Gabor

Abrasive wear of link chains

an Steenkiste, Dimitri,Plasschaert, Sander,De Baets, Patrick,De Pauw, Jan

SCAD Journal Volume 2, Issue 2, Preface and table of contents

Van Wittenberghe, Jeroen

Implementation of an unloading compliance procedure for measurement of crack growth in pipeline steel

an Minnebruggen, Koen,Van Puyvelde, Dries,De Waele, Wim,Verstraete, Matthias

Non destructive testing techniques for risk based inspection

Van den Abeele, Filip,Goes, Patrick

A nice thing about standards

Verstraeten, R.,Jonckheere, T.,De Meyer, R.,Van Campenhout, J.

Groove design for form fit joints made by electromagnetic pulse crimping

anhulsel, P.,Van Wonterghem, M.,De Waele, W.,Faes, Koen

Symmetry and similarity properties of 2D figures

Szakal, Z.,Zsoldos, I.

Product crossing: designing connections using a product example

Bleuze, Tore,Ceupens, J.,De Baets, Patrick,Detand, J.;

Characterization of a resonant bending fatigue test setup for pipes

laeys, Jonas,Van Wittenberghe, Jeroen,De Baets, Patrick,De Waele, Wim

Development of a continuum plasticity model for the commercial finite element code ABAQUS

Safaei, M.,De Waele, W.

Design of crack arrestors for ultra high grade gas transmission pipelines: material selection, testing and modelling

Van den Abeele, F.,Di Biagio, M.

Review and classification of fretting fatigue test rigs

De Pauw, Jan,De Baets, Patrick,De Waele, Wim

Failure behaviour of preloaded API line pipe threaded connections

eys, Jonas,Roeygens, Koenraad,Van Wittenberghe, Jeroen,Galle, Timothy

Design of crack arrestors for ultra high grade gas transmission pipelines: simulation of crack initiation, propagation and arrest

Van den Abeele, F.,Di Biagio, M.,Amlung, L.

Stability of offshore structures in shallow water depth

Van den Abeele, F.,Vande Voorde, J.

Design of a (mini) wide plate specimen for strain-based weld integrity assessment

Hertele, S.,De Waele, W.,Denys, R.,Verstraete, M.

Increasing information feed in the process of structural steel design

Pauwels, P.,Jonckheere, T.,De Meyer, R.,Van Campenhout, J.

Determination of granular assemblies' discrete element material parameters by modelling the standard shear test

Keppler, I.,Csatar, A.

Improved handling characteristics of off-road vehicles by applying active control of steering wheel torque

Kis, J.,Janosi, L.

Influence of design features on the structural integrity of threaded pipe connections

Galle, Timothy,De Waele, Wim,De Baets, Patrick,Van Wittenberghe, Jeroen

Magnetic pulse welding: lessons to be learned from explosive welding

erstraete, J.,De Waele, W.,Faes, K.

SCAD Journal Volume 2, Issue 3, Preface and table of contents

an Wittenberghe, Jeroen;

Material selection for a new type of fire extinguisher

ambert, L.,De Waele, W.,Van De Vijver, G.

The symmetrical behaviour of carbon nanotubes junctions

Pataki, T.I.,Szakal, Z.

Failure behaviour of a tumble dryer

roessaert, S.,De Waele, W.,De Groote, W.,Delorge, E.

Characterization and modeling of friction and wear: an overview

Al-Bender, F.,De Moerlooze, K.

LME susceptibility of galvanised welded structures of high strength steels

ermeersch, M.,De Waele, W.,Van Caenegem, N.

On the dynamic stability of high-speed gas bearings: stability study and experimental validation

Waumans, T.,Peirs, J.,Reynaerts, D.,Al-Bender, F.

Development and validation of a high constraint modified boundary layer finite element model

Verstraete, Matthias,De Waele, W.,Hertele, Stijn

Developing small-aircraft service and re-construction of landing-gear leg support

Lefanti, R.,Kalacska, Gabor,Oldal, I.,Petroczki, K.

Machinability of engineering polymers

Keresztes, Robert,Kalacska, Gabor,Zsidai, L.,Dobrocsi, Z.

SCAD Journal Volume 2, Issue 1, Preface and table of contents

Van Wittenberghe, Jeroen

Friction welding of steel to ceramic

ombaut, P.,De Waele, W.,Faes, K.

Kinematics of the knee joint

ampers, W.,Sierens, T.

Effect of velocity on roll/slip for low and high load conditions in polymer composite

Sukumaran, Jacob,Ando, Matyas,Rodriguez Fereira, Vanessa,De Baets, Patrick

Dry sliding friction and wear response of WC-Co hardmetal pairs in linearly reciprocating and rotating contact

Perez Delgado, Yeczain,Bonny, Koen,De Baets, Patrick,Neis, Patric Daniel

Abrasive wear of different hot-dip galvanized multilayers

Szabadi, L.,Kalacska, G.,Pek, L.,Palinkas, I.

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705