All Title Author
Keywords Abstract

Publish in OALib Journal
ISSN: 2333-9721
APC: Only $99
Paper Submission

Why Us? >>
- Open Access
- Peer-reviewed
- Rapid publication
- Lifetime hosting
- Free indexing service
- Free promotion service
- More...
- Search engine friendly

Archives of Materials Science and Engineering

ISSN Print: 1897-2764

ISSN Online:

Website: http://www.archivesmse.org/

Share:




Go

Analysis of properties of automotive vehicle suspension arm depending on different materials used in the MSC.Adams environment

？. Konieczny,R. Burdzik,B. ？azarz

Research the impact of steel scrap participation in the metallic charge for the yield of liquid steel casted in BOF process

Z. Kudliński,K. Janiszewski,J. Pieprzyca

The effect of TiAl and Ti3 Al reinforcement on microstructure changes and properties of aluminium matrix composites

M. Adamiak

Impact of the cam and follower cooperation and of lubrication on the cam wear

P. Fol？ga,R. Burdzik,？. Konieczny,Z. Stanik

Possibility of wettability improvement of Al2O3 preforms infiltrated by liquid aluminium alloy by deposition Ni-P coating

L.A. Dobrzański,M. Kremzer,M. Dziekońska

An attempt to specify the degradation of the electric furnace hearth for the determination of future operating properties

W. Soszyński*,A. Studnicka

Influence of liquid phase on physical properties of the new triphasic bone cement

A. ？lósarczyk,N. Osypanka,J. Czechowska,Z. Paszkiewicz

Material properties and structure of thick-walled elements made of steel 7CrMoVTiB10-10 after long-term annealing

A. Zieliński,J. Dobrzański

Multi-variant calculations of induction heating process

A. Smalcerz,R. Przy？ucki,K. Konopka,A. Fornalczyk

Fractal and multifractal characteristics of the PVD and CVD coatings deposited onto compound tool ceramics

W. Kwa？ny,J. Miku？a

Viscosity calculations of mold slag in continuous casting

D. Kalisz

Analysis of technological strategies on the example of the production of the tramway wheels

M. Konstanciak

Analysis of the microstructure of 37MnMo6-3 hypoeutectoid steel

E. Ro？niata,R. Dziurka

Quality and properties of the cast iron produced on the steel scrap base

K. Janerka,J. Jezierski,J. Szajnar

Research on polyamide matrix composites filled with hard coal

M. Rojek,J. Stabik,M. Szymiczek,？. Suchoń

Effect of age hardening on corrosion resistance and hardness of CoCrMo alloys used in dental engineering

L.A. Dobrzański,？. Reimann,C. Krawczyk

Influence of structure on soft magnetic properties of Co70Fe5Si15B10 metallic glass ribbons

R. Babilas,R. Nowosielski,G. Dercz,Z. Stok？osa

Comparison of the abrasion wear resistance of the laser alloyed hot work tool steels

L.A. Dobrzański,E. Jonda,K. Labisz

Magnetism in disordered materials

A. Chrobak

Mathematical modeling of nickel behaviour in the liquid steel flowed through the one strand tundish

A. Cwudziński,J. Jowsa

The influence of production method on oxidation resistance of the aluminide coatings obtained on IN 100 alloy

M. Pytel,M. Góral,M. Maliniak

Mechanical and chemical properties of sewage pipes

？. Wierzbicki,M. Szymiczek

Development trends of mucous-borne dentures in the aspect of elastomers applications

A.D. Dobrzańska-Danikiewicz,J. ？mudzki

Fabrication methods and heat treatment conditions effect on structure and properties of the gradient tool materials

L.A. Dobrzański,A. Kloc-Ptaszna,M. Pawlyta,W. Pakie？a

Informative technologies in the material products designing

L.A. Dobrzański,R. Honysz

Structure and stresses in high dimension brazed joints of cermets and steel

J. Nowacki

Utilization of thermal analysis to thermo physical properties study of real steel grades

P. Klus,M. ？aludová,K. Gryc,B. Smetana

Effects of cryogenic cooling on surface layer characteristics produced by hard turning

W. Grzesik,K. ？ak,M. Pra？mowski,B. Storch

Light and electron microscope investigations of cast Zn-Al alloys

B. Krupińska,Z. Rdzawski,K. Labisz

Evaluation of chemical heterogeneity of a 90-ton forging ingot

P. Machov？ák,A. Opler,Z. Carbol,A. Trefil

Optimization of the deposition parameters of DLC coatings with the MCVA method

M. Pancielejko,A. Czy？niewski,V. Zavaleyev,A. Pander

TEM investigations of laser texturized polycrystalline silicon solar cell

J. Konieczny,L.A. Dobrzański,A. Dryga？a,J. Lel？tko

Comparison of the CrN and TiN/(Ti,Al)N PVD coatings deposited onto plasma nitrited steel

M. Polok-Rubiniec,L.A. Dobrzański

Modelling of crystallizer wear

J. David,P. ？vec,R. Frischer

Welding of titanium alloy by different types of lasers

A. Lisiecki

Parameters of welding with micro-jet cooling

T. W？grzyn,J. Piwnik,B. ？azarz,R. Wiesza？a

The influence of heat treatment on structure, mechanical properties and corrosion resistance of steel X10CrNi18-8

M. Kciuk,A. Kurc-Lisiecka

Diamond composites with nanoceramic boride bonding phases

M. Szutkowska,L. Jaworska,M. Rozmus,P. Klimczyk

The cutting properties and wear of the knives with DLC and W-DLC coatings, deposited by PVD methods, applied for wood and wood-based materials machining

M. Pancielejko,A. Czy？niewski,A. Gilewicz,V. Zavaleyev

Influence of turbine blade geometry on thickness of TBCs deposited by VPA and PS-PVD methods

M. Góral,J. Sieniawski,S. Kotowski,M. Pytel

Polymer materials used in endodontic treatment - in vitro testing

J. Dobrzańska,K. Go？ombek,L.B. Dobrzańsk

Micro-jet cooling gases for low alloy steel welding

T. W？grzyn,J. Piwnik,B. ？azarz,M. Plata

Carbon materials as fillers for polymer matrix composites

J. Stabik,M. Rojek,？. Suchoń,K. Mrowiec

Changes in the fractal and electronic structures of activated carbons produced by ultrasonic radiation and the effect on their performance in supercapacitors

B.Ya. Venhryn,I.I. Grygorchak,Z.A. Stotsko,Yu.O. Kulyk

Microstructure of AgSnBi powder consolidated in reciprocating extrusion process

M.W. Richert,J. Richert,A. Hotlo？,M. Perek-Nowak

Polymer nanocomposites reinforced with montmorillonite

L.A. Dobrzański,M. Bilewicz,J.C. Viana

Unsteady state heat flow in the exhaust valve in turbocharged Diesel engine covered by the layer of the carbon deposit

A. Hornik,D. J？drusik,K. Wilk

Formation of gradient surface layers on high speed steel by laser surface alloying process

M. Bonek

TiO2 and SiO2 layer deposited by sol-gel method on the Ti6Al7Nb alloy for contact with blood

W. Walke,Z. Paszenda,P. Karasiński,J. Marciniak

Analysis of material deformation work measures in determination of a vehicle’s collision speed

R. Burdzik,P. Fol？ga,？. Konieczny,B. ？azarz

Go




©2008-2020 OALib, Inc | Public user content licensed CC-BY 4.0 unless otherwise specified. OALib ISSN Online: 2333-9721 OALib ISSN Print: 2333-9705