%0 Journal Article
%T 基于形状记忆效应的锂硫电池微型驱动装置设计及其充放电性能研究
Design of Micro Driving Device for Li-S Batteries Based on Shape Memory Effect and Their Charge-Discharge Performances Study
%A 蒋晓旭
%A 庞素敏
%A 李志和
%A 李潇
%A 关昕
%A 张勇
%A 赵红
%J Advances in Material Chemistry
%P 99-108
%@ 2331-0146
%D 2025
%I Hans Publishing
%R 10.12677/amc.2025.132012
%X 锂硫电池因具有高能量密度、对环境友好及成本效益高等优点，得到了众多科研人员的广泛关注，但多硫化物“穿梭效应”仍是阻碍锂硫电池商业化应用的主要难题。因此，本文利用形状记忆合金(SMA)和碳纳米管(CNT)设计一种仿生智能微型装置来捕获多硫化物，微型驱动装置能感知温度的变化自动改变其形状，从而带动碳纳米管捕获多硫化物。放置微型驱动装置的锂硫电池50次充放电循环以后的放电比容量达到了2150 mAh·g-1，远大于未放置微型驱动装置的锂硫电池放电比容量1678 mAh·g-1，显示出较高的比容量及较好的循环稳定性。本文设计搭建的仿生智能微型裝置将为锂硫电池商业化应用提供很好的理论借鉴。
Lithium-sulfur batteries have drawn numerous attentions by many researchers, because of their high energy density, environmental friendliness and high-cost effectiveness. However, the “shuttle effect” of polysulfide is still the main difficulty that hinders the commercial application of lithium- sulfur batteries. Herein, to capture polysulfide, shape memory alloy (SMA) and carbon nanotubes (CNTs) are adopted to design a bionic intelligent micro-device. Sensing temperature deviation, the bionic micro-device automatically changes its shape, which drives CNTs to capture polysulfides. When the micro-driving devices is used in Li-S battery, a high specific discharge capacity of 2150 mAh·g−1 is achieved after 50th charge-discharge cycles, which much higher than the discharge capacity (1678 mAh·g−1) of Li-S battery without micro-driving devices, demonstrating high specific capacity and good cyclic stability. The bionic intelligent micro-device designed and constructed in this paper will provide some new ideas for the commercial application of lithium-sulfur batteries.
%K 锂硫电池，
%K “
%K 穿梭效应”
%K ，
%K 形状记忆合金，
%K 碳纳米管
Li-S Batteries
%K “
%K Shuttling Effects”
%K Shape Memory Alloy
%K Carbon Nanotubes (CNTs)
%U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=110808