%0 Journal Article %T 五支装品吸烟包装成型试验平台的设计与开发
Design and Development of Five Drawer Type Cigarette Product Test Platform %A 夏睿 %A 李昂 %J Instrumentation and Equipments %P 81-92 %@ 2332-7006 %D 2025 %I Hans Publishing %R 10.12677/iae.2025.131012 %X 随着卷烟市场对卷烟包装的形式要求越来越高，在卷烟营销过程中对于品吸烟的包装形式提出了更高的要求，既要便于分发又要经济实惠，因此五支装抽屉式卷烟产品的需求越来越大。然而目前卷烟工厂针对五支装抽屉式卷烟产品的生产主要还是依靠手工包装，生产效率低，产品质量的一致性差。因此本文运用模块化的理念设计一种满足五支装抽屉式卷烟产品生产的实验平台，针对五支装抽屉式卷烟产品的包装工艺特点，将五支装抽屉式卷烟产品生产的实验平台设计成四工位结构，通过凸轮分割器将四工位连接成一个圆形的转台结构。在个各工位分别设计内盒下纸模块、烟支推送模块、内盒折叠模块和外盒成型模块，通过四个工位各功能模块的结构设计、执行机构选型以及组装调试协同作业，完成五支装抽屉式卷烟产品的包装，实验论证了设计的可靠性，五支装抽屉式卷烟产品生产的实验平台包装速度达到10包/min，可以稳定运行。
As the cigarette market has higher and higher requirements for the form of cigarette packaging, higher requirements have been put forward for the packaging form of cigarette smoking in the process of cigarette marketing, which should be easy to distribute and economical, so the demand for five-drawer cigarette products is increasing. However, at present, the production of five-drawer cigarette products in cigarette factories mainly relies on manual packaging, with low production efficiency and poor product quality consistency. Therefore, this paper uses the modular concept to design an experimental platform for the production of five-drawer cigarette products. According to the packaging process characteristics of five-drawer cigarette products, the experimental platform for the production of five-drawer cigarette products is designed into a four-station structure, and the four stations are connected into a circular turntable structure through a CAM separator. In each station, the inner box paper module, cigarette push module, inner box folding module and outer box forming module are designed respectively. Through the structural design of each function module in the four stations, the selection of actuator and the assembly and debugging cooperation, the packaging of five drawer cigarette products is completed. The reliability of the design is demonstrated by experiments. The experimental platform for the production of five-drawer cigarette products has a packaging speed of 10 packets/min, which can run stably. %K 五支装， %K 抽屉式， %K 模块化设计， %K 凸轮分割器， %K 试验平台
Five Pens %K Draw-Out Type %K Modular Design %K Cam Splitter %K Test Platform %U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=110344