%0 Journal Article
%T 45&#176弯管和不同曲率90&#176弯管的实验与数值模拟研究<br>Experimental and Numerical Simulation of 45&#176 Bending and 90&#176 Bending with Different Curvatures
%A 贺浩
%A 刘冬华
%A 黄振华
%A 周传辉
%J Modeling and Simulation
%P 1908-1920
%@ 2324-870X
%D 2024
%I Hans Publishing
%R 10.12677/mos.2024.132178
%X 本文通过实验与数值模拟方法，对45？弯管和不同曲率半径比(R/D = 1, 2, 3, 4, 5)的90？弯管阻力系数进行了研究，分析了弯管内压力分布、速度矢量、二次流动及流动轨迹等规律，并重点分析了不同弯管曲率半径与管径之比下的弯管中流场流动特点。结果表明：RNG k-<i>ε</i>湍流模型的模拟结果与实验吻合较好。同一Re下，R/D越大局部阻力系数<i>ξ</i>越小，R/D在1~3范围内增大曲率可以明显降低局部阻力系数，再增大曲率局部阻力减小不明显。<br />
In this paper, the resistance coefficient of 45？ bending pipe and 90？ bending pipe with different ratio of curvature radius (R/D = 1, 2, 3, 4, 5) was studied by experimental and numerical simulation methods, and the laws of pressure distribution, velocity vector, secondary flow and flow trajectory in bending pipe were analyzed, and the characteristics of flow field in bending pipe with different ratio of curvature radius to diameter were emphatically analyzed. The results show that the simulation results of RNG k-<i>ε</i> turbulence model agree well with the experimental results. Under the same Re, the larger the R/D, the smaller the local drag coefficient. When R/D increases the curvature in the range of 1~3, the local drag coefficient can be significantly reduced, and when R/D increases the curvature, the local drag is not significantly reduced.
%K 45&#176弯管，90&#176弯管，阻力实验，数值模拟，曲率半径比，局部阻力系数ξ<br>45&#176 Bending Pipe
%K 90&#176 Bend Pipe
%K Resistance Test
%K Numerical Simulation
%K Curvature Radius Ratio
%K Local Resistance Coefficient ξ
%U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=83601