%0 Journal Article %T A Method to Obtain the Moving Speed of Uncooperative Target Based on Only Two Measurements %A Tao Yu %J Advances in Aerospace Science and Technology %P 1-9 %D 2024 %I %R 10.4236/aast.2024.91001 %X The existing research results show that a fixed single station must conduct three consecutive frequency shift measurements and obtain the targetกฏs moving speed by constructing two frequency difference equations. This article proposes a new method that requires only two consecutive measurements. While using the azimuth measurement to obtain the angular difference between two radial distances, it also conducts two consecutive Doppler frequency shift measurements at the same target azimuth. On the basis of this measurement, a frequency difference equation is first constructed and solved jointly with the Doppler frequency shift equation. By eliminating the velocity variable and using the measured angular difference to obtain the targetกฏs lead angle, the targetกฏs velocity can be solved by using the Doppler frequency shift equation again. The new method avoids the condition that the target must move equidistantly, which not only provides an achievable method for engineering applications but also lays a good foundation for further exploring the use of steady-state signals to achieve passive positioning. %K Moving Speed %K Non-Cooperative Target %K Doppler Frequency Shift %K Frequency Difference Equation %K Azimuth %K Steady-State Signal %K Passive Location %U http://www.scirp.org/journal/PaperInformation.aspx?PaperID=131650