%0 Journal Article
%T 壳聚糖–海藻酸钠–丹参酮IIA微球的制备及其工艺优化
Preparation and Process Optimization of Chitosan-Sodium Alginate-Tanshinone IIA Microspheres
%A 汤芮
%A 史浩
%A 郑佳琪
%A 李千金
%A 董祖琴
%A 张腾
%J Hans Journal of Chemical Engineering and Technology
%P 74-80
%@ 2161-8852
%D 2022
%I Hans Publishing
%R 10.12677/HJCET.2022.122011
%X 目的:优化壳聚糖–海藻酸钠(CS-SA)包裹丹参酮IIA (TIIA)的工艺条件,得到最佳工艺。方法:研究海藻酸钠含量、壳聚糖含量、Ca2+含量、Span-80等工艺条件对微球粒径分布的影响,在此基础上,研究SA、CS、Ca2+含量对载药量的影响,以工艺参数进行优化。结果:最佳工艺条件:SA含量为1.5%、Ca2+含量30%、CS含量0.4%,在该最佳工艺条件下,最大载药量达到13.2%。结论:为CS-SA包裹TIIA工业化生产应用提供了方向。
Objective: The research aimed to optimize the process conditions of tanshinone IIA (TIIA) encapsulated by chitosan-sodium alginate (CS-SA) and obtain the best process. Method: The effects of sodium alginate content, chitosan content, Ca2+ content, Span-80 and other process conditions on the particle size distribution of microspheres were studied. On this basis, the effects of SA, CS and Ca2+ content on drug loading were studied. The process parameters were optimized. Result: The optimal process conditions: SA content was 1.5%, Ca2+ content was 30%, CS content was 0.4%. Under the optimal process conditions, the maximum drug loading amount reached 13.2%. Conclusion: It provides a direction for the industrial production and application of CS-SA wrapped TIIA.
%K 壳聚糖,海藻酸钠,丹参酮IIA,微球
Chitosan
%K Sodium Alginate
%K Tanshinone IIA
%K Microspheres
%U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=49184