%0 Journal Article %T Evaluaci車n del densificado de la madera de Gyrocarpus americanus Jacq. en su densidad y m車dulo de elasticidad %A Javier-Ram車n Sotomayor-Castellanos %J - %D 2018 %R https://doi.org/10.14483/23448350.12830 %X Resumen (es_ES) El objetivo de la investigaci車n fue densificar madera de G. americanus y evaluar el efecto del tratamiento en la densidad y en el m車dulo de elasticidad. Inicialmente, la madera se hidrat車 en agua, durante 72 h y con temperatura de 20 ∼C. Posteriormente, las probetas se suavizaron durante 4 h en agua caliente con temperatura de 93,5 ∼C. A continuaci車n, se prensaron las probetas con un dispositivo fabricado especialmente para la investigaci車n. La estrategia de investigaci車n consisti車 en determinar la densidad y realizar pruebas de flexi車n est芍tica antes y despu谷s del tratamiento. Los coeficientes de compresi車n y de densificado fueron evaluados despu谷s del tratamiento. Se prepararon 32 probetas normalizadas y se realizaron pruebas de flexi車n est芍tica antes y despu谷s del densificado. Para los resultados antes y despu谷s del densificado se realizaron pruebas de diferencias de medias para muestras independientes. Se calcularon las regresiones entre los valores del m車dulo de elasticidad como variable dependiente en funci車n de la variable independiente densidad. El coeficiente de compresi車n fue de 56,3% y el coeficiente de densificado fue de 50,3%. Despu谷s del tratamiento la densidad de G. americanus aument車 102% y su m車dulo de elasticidad se increment車 en 113%. Los 赤ndices de densificado, el芍stico y de calidad confirmaron que el tratamiento de densificado higro-termo-mec芍nico produjo buenos resultados para madera de baja densidad. Resumen (en_US) The densified of wood is a mechanism of deformation that occurs during the manufacture of composite products. This technology aims at the dimensional stabilization of wood and increases its mechanical properties. The objective of the research was to densify Gyrocarpus americanus Jacq. wood and to evaluate the effect of the treatment on density and modulus of elasticity. Initially, the wood was hydrated in water for 72 h and at a temperature of 20 ∼C. Subsequently, the specimens were softened for 4 h in hot water at a temperature of 93.5 ∼C. The specimens were then pressed with a device made especially for the investigation. The research strategy was to determine density and perform static flexion tests before and after treatment. The compression and densification coefficients were evaluated after treatment. Thirty-two standardized specimens were prepared and static flexural tests were performed before and after densification. For the before and after densified results tests of mean differences for independent samples were performed. The regressions between the values of the modulus of elasticity as a %K wood density %K quality index %K densification index %K elastic index %K modulus of elasticity densidad de la madera %K 赤ndice de calidad %K 赤ndice de densificado %K 赤ndice el芍stico %K m車dulo de elasticidad %U https://revistas.udistrital.edu.co/index.php/revcie/article/view/12830