%0 Journal Article
%T Assessment of the Input Substrate Characteristics Included in the Anaerobic Digestion Model No. 1 (ADM1)
%A Angel David Rodriguez
%A Herbert Enrique Rojas
%A Laura Andrea Morales
%J -
%D 2017
%R https://doi.org/10.14483/udistrital.jour.reving.2017.2.a07
%X Abstract (en_US) Context: Anaerobic Digestion (AD) is a well-established process and widely used for wastewater treatment and power generation worldwide. In engineering, the Anaerobic Digestion Model number 1 (ADM1) is the preferred tool for predicting the behavior of AD. However, this model requires a detailed characterization of the input substrate, which is often a difficult and expensive process. This paper presents an analysis of the input waste variables in the ADM1 and its effects on the biogas production, in order to identify on which variables the characterization should be centered. Method: A sensitivity analysis was performed using a simple methodology that consisted of establishing a reference case and change the value of each input concentrations one at a time leaving the other parameters equal. For this a specific range of variation was defined using the values of parameter extracted from several references. Simulations were done in MATLAB/Simulinkˋ using a routine developed by the authors based on the ADM1 implementation proposed in the Lund University, Sweden. Results: The analysis reveals that most critical variables involved in the methane production are temperature, volumetric flow rate of substrates and the concentrations of proteins, lipids and carbohydrates. For the case analyzed, variations in concentrations of lipids and carbohydrates increase the production of methane by more than 500%. Conclusions: In the concentrations of proteins, lipids and carbohydrates should focus the characterization of waste input when the ADM1 is implemented. Also, simulations shows that the input concentrations should be carefully estimated because oversizing of these can cause erroneous results. Language: English Abstract (es_ES) Contexto: La digesti車n anaer車bica (DA) es un proceso bien establecido y ampliamente utilizado para el tratamiento de aguas residuales y generaci車n de energ赤a en todo el mundo. En ingenier赤a, el modelo de digesti車n anaer車bica n迆mero 1 (ADM1) es la herramienta preferida para predecir el comportamiento de la DA. Sin embargo, este modelo requiere una caracterizaci車n detallada del sustrato de entrada, que a menudo es un proceso dif赤cil y costoso. En este trabajo se presenta un an芍lisis de las variables que caracterizan el residuo de entrada en el ADM1 y sus efectos en la producci車n de biog芍s, con el fin de identificar cu芍les son las variables en las que la caracterizaci車n deber赤a centrarse. M谷todo: Se realiz車 un an芍lisis de sensibilidad utilizando una metodolog赤a simple que consisti車 en establecer un caso de referencia y cambiar
%K ADM1
%K anaerobic digestion
%K biogas production
%K sensitivity analysis. ADM1
%K an芍lisis de sensibilidad
%K digesti車n anaer車bica
%K producci車n de biog芍s
%U https://revistas.udistrital.edu.co/index.php/reving/article/view/11395