%0 Journal Article
%T Development of Nanoporous Ni-Sn Alloy and Application for Chemoselective Hydrogenation of Furfural to Furfuryl Alcohol
%A Nobuyuki Ichikuni
%A Rodiansono Rodiansono
%A Shogo Shimazu
%A Takayoshi Hara
%J -
%D 2014
%R 10.9767/bcrec.9.1.5529.53-59
%X A very simple synthetic procedure was developed for the preparation of Ni-Sn alloy catalysts that were utilised for chemoselective hydrogenation of furfural, producing furfuryl alcohol almost exclusively. The mixture of nickel nanoparticles supported on aluminium hydroxide (R-Ni/AlOH) and a solution containing tin was treated under hydrothermal condition, producing the as prepared nickel-tin alloy supported on aluminium hydroxide (Ni-Sn/AlOH). H2 treatment at range of temperature of 673-873 K for 1.5 h to the as prepared Ni-Sn/AlOH produced nanoporous Ni-Sn alloy catalysts. XRD patterns and SEM images revealed that the formation of Ni-Sn alloy of Ni3Sn and Ni3Sn2 phases and the transformation of crystalline gibbsite and bayerite into amorphous alumina were clearly observed after H2 treatment at 873 K. The formation of the Ni-Sn alloy may have played a key role in the enhancement of the chemoselectivity. £¿ 2014 BCREC UNDIP. All rights reserved Received: 1st September 2013; Revised: 26th November 2013; Accepted: 7th December 2013 [How to Cite: Rodiansono, R., Hara, T., Ichikuni, N., Shimazu, S. (2014). Development of Nanoporous Ni-Sn Alloy and Application for Chemoselective Hydrogenation of Furfural to Furfuryl Alcohol. Bulletin of Chemical Reaction Engineering & Catalysis, 9 (1): 53-59. (doi:10.9767/bcrec.9.1.5529.53-59)] [Permalink/DOI: http://dx.doi.org/10.9767/bcrec.9.1.5529.53-59
%K nanoporous Ni-Sn alloy
%K chemoselective hydrogenation
%K furfural
%K furfuryl alcohol
%U https://ejournal.undip.ac.id/index.php/bcrec/article/view/5529