%0 Journal Article
%T 预处理棉短纤维/EPDM复合材料的性能研究
%A 周彦豪
%A 岑兰
%A 廖俊杰
%A 李福强
%A 陈福林
%J -
%D 2009
%X 采用一种含醚键和羟基等多官能团氟硅化合物（加工助剂M）和一种脂肪酸酯磺酸盐化合物（分散剂FJ）分别预处理废旧棉短纤维（SCF），并研究预处理SCF对SCF/EPDM复合材料的硫化特性和物理性能的影响。结果表明，适量的加工助剂M或分散剂FJ均可改善SCF在EPDM中的分散性，而对胶料的硫化特性影响不大；加工助剂M能增强SCF与EPDM的界面粘合，从而提高复合材料的撕裂强度和拉断伸长率。;The waste short cotton fibers(SCF) were pretreated with a multi-functional fluorinated silicone compound containing ether bond and hydroxyl group(processing aid M) and a fatty acid sulfonate multi-component mixture(disperser FJ) respectively，and the effects of pretreated SCF on the curing behavior and physical properties of SCF/EPDM composites were investigated.The results showed that the dispersion of SCF in EPDM was improved by adding proper amount of processing aid M or disperser FJ，but this had little effect on the curing behavior；the tear strength and elongation at break of the composites were increased by adding processing aid M through improvement of the boundary adhesion
%K [棉短纤维
%K 预处理
%K EPDM
%K 复合材料
%K 分散性
%K 棉短纤维
%K 预处理
%K EPDM
%K 复合材料
%K 分散性
%K short cotton fibers
%K pretreatment
%K EPDM
%K composite
%K dispersion]
%U http://www.rubbertire.cn/gy/xjgy/ch/reader/view_abstract.aspx?file_no=XJ20091204&flag=1