%0 Journal Article
%T 基于断裂力学的钢丝缠绕胶管疲劳寿命分析
%A 李志诚
%A 王孜丰
%A 苏芮
%A 雍占福
%J -
%D 2020
%R 10.12136/j.issn.1000-890X.2020.04.0243
%X 建立钢丝缠绕胶管的三维有限元模型，基于橡胶材料疲劳裂纹扩展理论，选取钢丝缠绕角度、钢丝层间距、钢丝层数、钢丝直径4个结构参数，采用正交试验法，以橡胶材料疲劳寿命为依据，分析在交变负荷下胶管的疲劳寿命和最大轴向位移。结果表明：钢丝层间距对胶管疲劳寿命的影响最大，其次是钢丝缠绕角度，再次是钢丝层数，最小是钢丝直径；钢丝层数对胶管最大轴向位移的影响最大，其次是钢丝缠绕角度，再次是钢丝层间距，最小是钢丝直径。;A 3D finite element model of steel wire winding rubber hose was established.Based on the theory of the fatigue crack growth of rubber material，selecting four structural parameters of the steel wire winding angle，spacing between steel wire layers，number of steel wire layers and steel wire diameter，the orthogonal test method was used to analyze the fatigue life and maximum axial displacement of the rubber hose under alternating load based on the fatigue life of the rubber material.The results showed that the spacing between steel wire layers had the greatest influence on the fatigue life of the rubber hose，followed by the steel wire winding angle，number of steel wire layers and steel wire diameter.The number of the steel wire layers had the greatest influence on maximum axial displacement of the rubber hose，followed by the steel wire winding angle，spacing between steel wire layers and  steel wire diameter
%K [钢丝缠绕胶管
%K 疲劳寿命
%K 轴向位移
%K 断裂力学
%K 正交试验法
%K 有限元分析
%K 钢丝缠绕胶管
%K 疲劳寿命
%K 轴向位移
%K 断裂力学
%K 正交试验法
%K 有限元分析
%K steel wire winding hose
%K fatigue life
%K axial displacement
%K fracture mechanics
%K orthogonal test method
%K finite element analysis]
%U http://www.rubbertire.cn/gy/xjgy/ch/reader/view_abstract.aspx?file_no=XJ2019-0275&flag=1