%0 Journal Article
%T 相容剂对氯化丁基橡胶/锦纶12共混体系结构和性能的影响
%A 伍社毛
%A 张建
%A 张立群
%A 王兰
%A 田明
%A 田洪池
%J -
%D 2014
%X 分别以聚丙烯接枝马来酸酐(PP-g-MAH)和氯化聚乙烯(CPE)为相容剂，研究相容剂种类和用量对氯化丁基橡胶(CIIR)/锦纶(PA)12共混体系微观结构、物理性能和热力学性能的影响。结果表明：与CPE相比，PP-g-MAH对CIIR/PA12共混体系的增容效果较为显著，且当PP-g-MAH用量为10份时，CIIR/PA12共混体系的相态结构和综合物理性能达到最佳。;The influence of compatibilizers on the structure and properties of CIIR/PA12 blend was investigated in this paper.The compatibilizers were polypropylene grafted maleic anhydride (PP-g-MAH) and chlorinated polyethylene (CPE).Compared with CPE，PP-g-MAH showed better compatibilization effect on CIIR/PA12 blend，and the optimum addition level of PP-g-MAH was 10 phr
%K [氯化丁基橡胶
%K 锦纶12
%K 相容剂
%K 聚丙烯接枝马来酸酐
%K 氯化聚乙烯
%K 氯化丁基橡胶
%K 锦纶12
%K 相容剂
%K 聚丙烯接枝马来酸酐
%K 氯化聚乙烯
%K CIIR
%K PA12
%K compatibilizer
%K PP-g-MAH
%K CPE]
%U http://www.rubbertire.cn/gy/xjgy/ch/reader/view_abstract.aspx?file_no=XJ20140104&flag=1