%0 Journal Article
%T <br>
%A 刘双宇
%A 徐丽
%A 曹余良
%A 李慧
%A 汪慧明
%A 王博
%A 白会涛
%A 盛鹏
%A 赵广耀
%A 陈新
%A 陈重学
%J 物理化学学报
%D 2019
%R 10.3866/PKU.WHXB201902021
%X Na0.44MnO2具有特殊的三维隧道结构和良好的化学稳定性，是一种理想的钠离子电池正极材料。本文研究了Na0.44MnO2正极材料的高温电化学性能，采用液相法对Na0.44MnO2正极材料进行Al2O3包覆改性，并通过电化学、形貌分析、结构分析、化学成分表征等方法研究Al2O3包覆的改性机制。结果表明：Al2O3包覆层有效地隔离了Na0.44MnO2与电解液的直接接触，缓解了高温下锰的溶解，从而维持了稳定的电极/溶液界面结构。Na0.44MnO2@Al2O3在55 ℃下的电化学性能相比未包覆Na0.44MnO2有显著提升：循环100次后容量保持率达79.2%，远高于未包覆的66.5%；在10C (1C = 120 mAh？g-1)的大电流密度下放电比容量达到63.6 mAh？g-1，而未包覆的仅有12.3 mAh？g-1。<br>Renewable energy resources (such as wind and solar) are being increasingly utilized to overcome issues of energy shortage and environmental deterioration. However, the intrinsically fluctuant and intermittent character of renewable energy sources hinders their practical application; therefore, batteries have been developed to act as a link between renewable energy sources and consumers. Lithium-ion batteries have become the most advanced battery technology in the last three decades, and have successfully captured the electric vehicles market; however, many concerns have recently arisen about the vastly expanded demand for lithium resources, which contrasts with their limited reserves. In this context, sodium-ion batteries have emerged as a promising alternative because of their intercalation chemistry similar to that of lithium-ion batteries, and the abundance of Na resources in the Earth's crust. Like lithium-ion batteries, the performance and cost of sodium-ion batteries are determined primarily by their cathodes. Among the various cathode materials that have been reported for sodium-ion batteries, Na0.44MnO2 is regarded as one of the most promising because of its opened three-dimensional tunnel structure and good chemical stability; it has also been demonstrated in previous studies to have superior cycling stability at room temperature. In practical terms, commercial batteries are often used at high temperatures (above 40 ℃) in summer. Several Mn-based cathode materials for lithium-ion batteries, such as LiMn2O4 and LiNi0.5Mn1.5O4, exhibit severe capacity decay at high temperatures. Therefore, the evaluation of the Na0.44MnO2 cathode in sodium-ion batteries at high temperatures is critical for its further commercialization. In this study, a Na0.44MnO2 cathode is prepared by a facile solid-state method and its electrochemical performance at a high temperature is measured. The electrochemical tests show that the Na0.44MnO2 cathode has a capacity retention of 66.5% over 100 cycles and a low reversible capacity of 12.3 mAh？g-1 at 10C (1C = 120 mAh？g-1). To improve its performance at a high temperature, Al2O3-coated Na0.44MnO2 is prepared via a liquid-phase method, and the coating effect is
%U http://www.whxb.pku.edu.cn/CN/Y2019/V35/I12/1357