%0 Journal Article
%T Chemical Kinetic Study of Nitrogen Oxides Formation Trends in Biodiesel Combustion
%A Junfeng Yang
%A Valeri I. Golovitchev
%A Pau Red¨®n Lurbe
%A J. Javier L¨®pez S¨¢nchez
%J International Journal of Chemical Engineering
%D 2012
%I Hindawi Publishing Corporation
%R 10.1155/2012/898742
%X The use of biodiesel in conventional diesel engines results in increased emissions; this presents a barrier to the widespread use of biodiesel. The origins of this phenomenon were investigated using the chemical kinetics simulation tool: CHEMKIN-2 and the CFD KIVA3V code, which was modified to account for the physical properties of biodiesel and to incorporate semidetailed mechanisms for its combustion and the formation of emissions. Parametric £¿-T maps and 3D engine simulations were used to assess the impact of using oxygen-containing fuels on the rate of NO formation. It was found that using oxygen-containing fuels allows more O2 molecules to present in the engine cylinder during the combustion of biodiesel, and this may be the cause of the observed increase in NO emissions. 1. Introduction Biodiesel fuels consist of long-chain monoalkyl esters derived from vegetable oils and expected to be increasingly important alternatives or supplements to conventional diesel fuel for use in diesel engines. However, in many studies, as summarized in [1], it was observed that the use of biodiesel in engines causes more emissions than are generated when using conventional diesel fuel. Numerous experimental and numerical studies have been conducted in order to better understand the origins of the increased emissions, and various explanations have been proposed on the basis of their results; the literature in this area has been reviewed by Mueller et al. [2]. Broadly speaking, two classes of explanation have been put forward: engine calibration effects [3] and combustion effects, such as higher flame temperatures [4, 5], injection timing shifting due to high bulk modulus [6], shorter autoignition delays, or combinations of these factors [2]. While these studies indicate that the increased emissions have multiple causes, it is generally accepted that the specific combustion chemistry of biodiesel is probably a major factor. Some of the factors listed have already been shown to have only minor effects on the amount of produced, including the adiabatic flame temperature [4] and the high-bulk modulus of biodiesel [7]. However, the fundamental principles underpinning these increased emissions remain elusive, and current experimental techniques have not yet proven to be sufficient for their identification. Consequently, computational modeling of biodiesel spray combustion is an attractive tool for obtaining new insights into the origins of the elevated emissions observed when using biodiesel fuels in conventional diesel engines. To determine the equilibrium compositions and
%U http://www.hindawi.com/journals/ijce/2012/898742/