%0 Journal Article
%T 杨氏模量测量误差研究及实验仪器的改进<br>Research on Young’s Modulus Measurement Error and Improvement of Experimental Instruments
%A 刘芬芬
%A 刘存海
%A 郭冰
%J Applied Physics
%P 449-454
%@ 2160-7575
%D 2019
%I Hans Publishing
%R 10.12677/APP.2019.911055
%X <div style=\"text-align:justify;\">
	通过对金属丝杨氏模量测量原理和数据的误差分析，研究了影响实验误差的几个关键因素，提出了减小实验误差的设计方案。通过增加光杠杆数量扩大放大倍数；固定实验仪器之间的相对位置，减小测量的不稳定因素等方法改进实验装备。利用改进后的实验装置进行实验测量，可显著降低不确定度，提高了测量值的可信赖程度。<br />
Through the analysis of the principle and data error of the Young’s modulus of wire, several key factors affecting the experimental error are studied, and a design scheme to reduce the experi-mental error is proposed. The experimental equipment is improved by increasing the number of optical levers to enlarge the magnification; fixing the relative position between the experimental instruments and reducing the unstable factors of the measurement. The experimental measure-ment using the improved experimental device can significantly reduce the uncertainty and improve the reliability of the measured value.
</div>
%K 杨氏模量，测量数据，误差<br>Young’s Modulus
%K Measurement Data
%K Experimental Error
%U http://www.hanspub.org/journal/PaperInformation.aspx?PaperID=33092