%0 Journal Article
%T 基于局部-整体有限元法的薄壁筒焊接变形计算<br>Welding deformation predictions of thin-wall cylinders using a local-global method
%A 赵海燕
%A 吴骏巍
%A 陆向明
%A 简波
%A 李宏伟
%J 清华大学学报（自然科学版）
%D 2017
%R 10.16511/j.cnki.qhdxxb.2017.22.019
%X 焊接变形会对焊接件的应用造成很大影响，进行结构件焊接变形的高精度和高效率预测具有重要的工程意义。该文针对大型薄壁圆筒件，应用局部-整体映射法对其环焊缝的焊接过程进行了有限元分析，得到了3种不同焊接顺序下的筒体变形结果。计算结果表明：相比于环缝一段焊和环缝两段焊，对环缝分成四段焊接情况下圆筒变形量最小，其数值相比于环缝一段焊减少约17%。将局部-整体法计算结果与热弹塑性法和实验方法所得结果进行了对比，三者吻合较好，但局部-整体法的计算用时仅为热弹塑性法的约1/6。<br>Abstract：Welding structure can be seriously affected by welding deformation. Accurate, efficient predictions of welding deformation are important in engineering projects. A local-global finite element analysis is used to analyze circumferential welding of large-scale thin-wall cylinders. The welding deformation of the cylinder is obtained in 3 sequences. The results show that the deformation of a 1/4 circle weld is less than for a full-circle weld and a 1/2 circle weld. The deformation of a 1/4 circle weld is about 17% less than for a full-circle weld. The local-global method results agree well with results from the thermo-elastic-plastic method and experimental data with the local-global method using about 1/6 of the time of the thermo-elastic-plastic method.
%K 焊接变形
%K 有限元分析
%K 局部-整体方法
%K 薄壁筒
%K &lt
%K br&gt
%K welding deformation
%K finite element analysis
%K local-global method
%K thin-wall cylinder
%U http://jst.tsinghuajournals.com/CN/Y2017/V57/I5/449