%0 Journal Article
%T <br>
%A 周亮
%A 张雪华
%A 李春忠
%A 李盼
%A 林琳
%A 贺涛
%A 邵坤娟
%J 物理化学学报
%D 2017
%R 10.3866/PKU.WHXB201705084
%X 本文利用无模版水热法合成了碲化钴（CoTe）纳米催化剂。为了避免引入残炭，所有的反应物均为无机化合物。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、紫外-可见（UV-Vis）吸收光谱和X射线光电子能谱（XPS）等技术对所制备的CoTe纳米材料进行了表征。结果表明，所得产物为具有六方结构的海绵状CoTe，且具有可见光（λ > 420 nm）光催化活性。当以N, N-二甲基乙酰胺（DMA）或纯水为溶剂时，二氧化碳（CO2）均可被光催化还原为甲烷（CH4），但产率较低。而在催化体系中加入牺牲剂三乙醇胺（TEOA）后，产物由CH4变为一氧化碳（CO）。这些实验结果表明，溶剂和牺牲剂的引入均可影响CoTe纳米催化剂对CO2的光催化还原性能。<br>A CoTenanocatalyst has been successfully synthesized via a template-free hydrothermal method. Inorganic reactants were used so as not to introduce carbon residue contamination. The as-prepared sample was characterized by many techniques, including X-ray diffraction, scanning electron microscopy, ultraviolet-visible light absorption spectroscopy, and X-ray photoelectron spectroscopy. The obtained sample was found to be sponge-like CoTe with a hexagonal structure, which exhibited visible-light (λ > 420 nm) photocatalytic activity. Photoreduction of CO2 over CoTe is believed to have undergone via the carbene pathway. The CO2 was photocatalytically reduced into CH4 with a low yield when N, N-dimethylacetamide (DMA) or water was used as the solvent. When the sacrificial agent triethanolamine (TEOA) was introduced into the photocatalytic system, however, the product was CO instead. These results indicated that both the solvent and sacrificial agent can influence the photoreduction of CO2 over the CoTenanocatalyst. Usually, the solubility of CO2 in an organic solvent such as DMA is higher than that in the pure water, leading to a larger product yield. The presence of TEOA may change the adsorption characteristics of CO onto the surface of the CoTe catalyst, as well as enhance the separation efficiency of photogenerated charge carriers, resulting in a change in the activity and selectivity of CO2 photoreduction
%U http://www.whxb.pku.edu.cn/CN/Y2017/V33/I9/1884