%0 Journal Article
%T 三塔悬索桥主缆与中塔鞍座抗滑简化计算方法
%A 王秀兰
%A 徐岳
%A 柴生波
%J 哈尔滨工业大学学报
%D 2016
%R 10.11918/j.issn.0367-6234.2016.09.013
%X 为研究三塔悬索桥主缆与鞍座的抗滑特性，给出了三塔悬索桥主缆抗滑安全系数的简化计算方法. 考虑活载作用下塔、缆变形以及加载跨与非加载跨主缆内力的平衡关系，推导鞍座处主缆抗滑安全系数的解析计算公式；建立有限元模型对公式进行验证；研究垂跨比、塔缆刚度比、恒活载比、跨径等主要设计参数对主缆抗滑安全系数的影响. 研究表明：该公式可用于悬索桥初步设计阶段主缆抗滑安全系数的估算，能够为设计参数的合理取值提供理论依据. 主缆抗滑安全系数随着塔缆刚度比增大而减小，当塔缆刚度比小于3时，增大塔缆刚度比，主缆抗滑安全系数迅速减小，当塔缆刚度比大于3时，塔缆刚度比对主缆抗滑安全系数影响较小；垂跨比对主缆抗滑安全系数的影响取决于桥塔刚度；主缆抗滑安全系数随着恒活载比值及跨径增大而增大.</br>To study anti-slip characteristics of main cable and saddle of three-tower suspension bridges,a simplified calculation method for calculating anti-slip factor was proposed. Analytical formulas for calculating anti-slip factor were deduced and finite element models were established to verify formulas. The effects of some important design parameters on the anti-slip factor were studied. Analysis shows that the analytical method has a high accuracy,which can be used in preliminary design of three-tower suspension bridges. With the ratio of tower and cable stiffness increasing,the anti-slip factor decreases; when the ratio of tower and cable stiffness is less than 3,changing the ratio of tower and cable stiffness has a great influence on the anti-slip factor. When the ratio of tower and cable stiffness is more than 3,the anti-slip factor is not sensitive to the ratio of tower and cable stiffness. Effect of sag-to-span ratio to the anti-slip factor depends on the tower stiffness. With the increment of span length and the ratio of dead load and live load,the anti-slip factor increases.
%K 悬索桥
%K 三塔
%K 解析法
%K 抗滑
%K 主缆&lt
%K /br&gt
%K suspension
%K bridge
%K three-tower
%K analytic
%K method
%K anti-slip
%K main
%K cable
%U http://hit.alljournals.cn/hitxb_cn/ch/reader/view_abstract.aspx?file_no=20160914&flag=1