%0 Journal Article
%T 间二氯苯合成间氯苯甲醚的工艺研究
%A 曹明珍
%A 徐
%A 徐
%A 鲍名凯
%A 王石发
%J 南京林业大学学报(自然科学版)
%D 2015
%R 10.3969/j.issn.1000-2006.2015.05.025
%X 以间二氯苯和甲醇钠为原料,对间氯苯甲醚合成的新工艺进行了研究; 通过单因素实验考察了溶剂种类及用量、间二氯苯与甲醇钠的摩尔比、反应温度、反应时间对间二氯苯转化率和间氯苯甲醚得率的影响,并采用正交实验法对反应条件进行了优化。确定了适宜的合成工艺条件为:以N,N-二甲基甲酰胺(DMF)作溶剂,溶剂用量为75 mL/mol,n(间二氯苯):n(甲醇钠)=1:1.2,反应温度为120 ℃,反应时间6 h。在此工艺条件下,间二氯苯的转化率为94.8%,间氯苯甲醚的得率为91.0%。采用FT-IR和GC-MS分析技术对间氯苯甲醚进行了表征。</br>A new preparation process for m-chloroanisole was explored from 1,3-dichlorobenzene and sodium methoxide. The effects of types of solvent and their dosage, mole ratio of 1,3-dichlorobenzene to sodium methoxide, reaction temperature and reaction time on the conversion rate of 1,3-dichlorobenzene and yield of m-chloroanisole was examined. The optimum synthesis conditions were obtained by orthogonal test as follows: N, N-dimethyl-formamide(DMF)was used as solvent, and solvent dosage was 75 mL/mol; the molar ratio of 1,3-dichlorobenzene to sodium methoxide was 1:1.2; reaction temperature was 120 ℃ and reaction time was 6 h. Under this optimum conditions, the conversion rate of 1,3-dichlorobenzene was 94.8% and the yield of 1,3-chloroanisole was 91.0%. The structure of the m-chloroanisole was analyzed by FT-IR and GC-MS
%K 间二氯苯
%K 甲醇钠
%K 甲氧基化反应
%K 间氯苯甲醚&lt
%K /br&gt
%K 1
%K 3-dichlorobenzene
%K sodium methoxide
%K methoxylation reaction
%K m-chloroanisole
%U http://nldxb.njfu.edu.cn/oa/darticle.aspx?type=view&id=201505025