%0 Journal Article
%T Encounters with Vortices in a Turbine Nozzle Passage
%A J. P. Gostelow
%A A. Mahallati
%A W. E. Carscallen
%A A. Rona
%J International Journal of Rotating Machinery
%D 2012
%I Hindawi Publishing Corporation
%R 10.1155/2012/928623
%X Experiments were conducted on the flow through a transonic turbine cascade. Secondary flows and a wide range of vortex types were encountered, including horseshoe vortices, shock-induced passage vortices, and streamwise vortices on the suction surface. In the separation region on the suction surface, a large rollup of passage vorticity occurred. The blunt leading edge gave rise to strong horseshoe vortices and secondary flows. The suction surface had a strong convex curvature over the forward portion and was quite flat further downstream. Surface flow visualization was performed and this convex surface displayed coherent streamwise vorticity. At subsonic speeds, strong von K¨¢rm¨¢n vortex shedding resulted in a substantial base pressure deficit. For these conditions, time-resolved measurements were made of the Eckert-Weise energy separation in the blade wake. At transonic speeds, exotic shedding modes were observed. These phenomena all occurred in experiments on the flow around one particular turbine nozzle vane in a linear cascade. 1. Introduction Leonardo da Vinci (1452¨C1519) was a notable early observer of vortices produced by a solid object placed in a stream of flow (Figure 1). When the object has thickness and produces a flow turning of 70¡ã or more, the generation of strong vorticity is to be expected and the subject turbine nozzle blading is no exception. The different vortical phenomena arising in the flow passage are described in this paper. The variety of the vortical forms and occurrences is surprising. Figure 1: Observations of vortices by Leonardo da Vinci. The encounters with vortices involve the flows outlined in the paper, starting at the leading edge. These are horseshoe vortices, passage vortices with attendant secondary flows, and on the suction surface, streamwise vortices. At the trailing edge, vortex shedding, energy separation, base pressures, and exotic shedding modes are observed. This is all in experiments on the flow around one particular turbine nozzle vane in a linear cascade. This diversity of vortex phenomena illustrates the challenge of describing the fundamental internal aerodynamics of turbomachinery blading. Greater physical understanding is required of these phenomena, including vortex structures on surfaces, vortex shedding, the base region, the vortex wake, and its interaction with the shock waves. Surface flow visualization was performed on the suction surface of the turbine blade at subsonic and transonic speeds. This was effective in providing a time-average mapping of streamwise vortical structures within the
%U http://www.hindawi.com/journals/ijrm/2012/928623/