%0 Journal Article
%T Exploration of the Power-Performance Tradeoff through Parameterization of FPGA-Based Multiprocessor Systems
%A Diana G£¿hringer
%A Jonathan Obie
%A Andr¨¦ L. S. Braga
%A Michael H¨¹bner
%A Carlos H. Llanos
%A J¨¹rgen Becker
%J International Journal of Reconfigurable Computing
%D 2011
%I Hindawi Publishing Corporation
%R 10.1155/2011/985931
%X The design space of FPGA-based processor systems is huge, because many parameters can be modified at design- and runtime to achieve an efficient system solution in terms of performance, power and energy consumption. Such parameters are, for example, the number of processors and their configurations, the clock frequencies at design time, the use of dynamic frequency scaling at runtime, the application task distribution, and the FPGA type and size. The major contribution of this paper is the exploration of all these parameters and their impact on performance, power dissipation, and energy consumption for four different application scenarios. The goal is to introduce a first approach for a developer's guideline, supporting the choice of an optimized and specific system parameterization for a target application on FPGA-based multiprocessor systems-on-chip. The FPGAs used for these explorations were Xilinx Virtex-4 and Xilinx Virtex-5. The performance results were measured on the FPGA while the power consumption was estimated using the Xilinx XPower Analyzer tool. Finally, a novel runtime adaptive multiprocessor architecture for dynamic clock frequency scaling is introduced and used for the performance, power and energy consumption evaluations. 1. Introduction Parameterizable function blocks used in FPGA-based system development, open a huge design space, which can only hardly be managed by the user. Examples for this are arithmetic blocks like divider, adder, and soft IP-multiplier, which are adjustable in terms of bit width and parallelism. Additional to arithmetic blocks, soft-IP processor cores provide a variety of parameters, which can be adapted to the requirements of the application to be realized with the system. Especially, Xilinx offers, with the MicroBlaze Soft-IP 32-bit RISC processor [1], a variety of options for characterizing the core individually. These options are, amongst others, the use and size of cache memory, the arithmetic unit, a memory management unit, and the number of pipeline stages. Furthermore, the tools offer to deploy semiautomatically up to two processor cores as multiprocessor on one FPGA. Certainly more cores are available for the system design by performing the custom tool chain. Every option as described above can be adjusted to find an optimized parameterization of the single processor core in relation to the target application. For example, a specific cache size can speed up the application tremendously, but also the optimal partition of functions onto the two cores has a strong impact on the speed and power consumption
%U http://www.hindawi.com/journals/ijrc/2011/985931/