%0 Journal Article
%T 聚醚铵改性蒙脱土对纳米蒙脱土/聚丙烯复合材料微观结构的影响<br>Effect of montmorillonite modified by poly (oxypropylene) amine hydrochlorides on microstructure of nano-montmorillonite/polypropylene composites
%A 王小群
%A 马骏
%A 李海
%J 复合材料学报
%D 2015
%R 10.13801/j.cnki.fhclxb.201501.006
%X 采用自制的2种大层间距(层间距分别为6.72 nm和8.66 nm)的聚醚铵(POP)改性蒙脱土(MMT) O-MMT1和O-MMT2, 通过共混法与增容剂马来酸酐接枝聚丙烯(PP-g-MAH)或聚丙烯(PP)复合, 考察了共混方法、共混时间、POP改性MMT的层间距及PP-g-MAH对MMT/PP-g-MAH和MMT/PP复合材料微观结构的影响。研究结果表明: 由于O-MMT1具有较大的层间距, 在溶液共混和熔融共混中, 均能使MMT在PP-g-MAH基体中发生剥离;随着共混时间延长, O-MMT1由插层型经过过渡状态向剥离型转变, 最终可以获得完全剥离的纳米MMT/PP-g-MAH复合材料;在溶液共混的过渡态中存在大量"双层结构"的MMT片层; 具有更大层间距的O-MMT2以及PP-g-MAH的加入均能更有效地促进MMT在PP基体中的剥离, 从而获得完全剥离的纳米MMT/PP复合材料。 Two kinds of self-prepared montmorillonite (MMT) modified by poly (oxypropylene) amine hydrochlorides (POP) with large basal spacing, O-MMT1 and O-MMT2 (the basal spacing is 6.72 nm and 8.66 nm, respectively), were added into polypropylene-grafted-maleic anhydride (PP-g-MAH) or polypropylene (PP) by blending methods. The effects of blending methods, blending time, basal spacing of the POP modified MMT and PP-g-MAH on the microstructure of MMT/PP-g-MAH and MMT/PP composites were investigated. The results show that O-MMT1 with large basal spacing benefits the exfoliation of MMT in PP-g-MAH matrix during the solution blending and melt blending process. With the extension of blending time, O-MMT1 turns to the exfoliated state through transitional state from inserted layer type and MMT/PP-g-MAH composites with completely exfoliated state are obtained finally. A lot of MMT layers with "bilayer structure" are found at the transitional state in the solution blending process. In addition, the addition of O-MMT2 with larger basal spacing and PP-g-MAH, both facilitate the exfoliation of MMT in PP matrix so that the completely exfoliated nano-MMT/PP composites are obtained.
%K 蒙脱土
%K 聚丙烯
%K 聚醚胺
%K 剥离
%K 微观结构&lt
%K br&gt
%K montmorillonite
%K polypropylene
%K poly (oxypropylene) amine hydrochlorides
%K exfoliation
%K microstructure
%U http://fhclxb.buaa.edu.cn/CN/abstract/abstract12444.shtml