%0 Journal Article
%T 反应挤出纳米类水滑石/尼龙6复合材料的结构与性能<br>Structure and properties of nano hydrotalcite/nylon 6 composites prepared by reactive extrusion
%A 李宏林
%A 杨桂生
%A 吴玉程
%J 复合材料学报
%D 2015
%R 10.13801/j.cnki.fhclxb.20140521.002
%X 采用自制的双甲氧基苯甲酸根离子柱撑镁铝类水滑石(MgAl-HTlcs)和己内酰胺(CL)为主要原料, 利用反应挤出工艺制备了纳米MgAl-HTlcs/尼龙 6复合材料, 研究了MgAl-HTlcs含量对复合材料结构与性能的影响。TEM照片显示: MgAl-HTlcs在复合材料中呈纳米级均匀分散, 当MgAl-HTlcs含量为1.0wt%(占MgAl-HTlcs与CL总质量的质量分数)时出现了部分片层剥离的类水滑石。紫外光谱结果表明: 与纯尼龙6相比, 少量均匀分散的MgAl-HTlcs使复合材料对近紫外波长为320~380 nm的紫外线吸收效果明显。XRD和DSC结果表明: 少量均匀分散的MgAl-HTlcs对尼龙 6起到了很好的异相成核剂的作用, 不仅提高了其结晶温度, 也增加了其结晶度。热重分析显示: 部分片层剥离MgAl-HTlcs的存在明显提高了复合材料的热稳定性。 With the main raw meterials of self-made double methoxybenzoic acid anion pillared hydrotalcite (MgAl-HTlcs) and caprolactam(CL), nano MgAl-HTlcs/nylon 6 composites were prepared by reactive extrusion, and the effect of MgAl-HTlcs content on microstructure and properties of the composites were investigated. TEM photographs show that MgAl-HTlcs disperse uniformly in composites as nanoscale and there are part exfoliated hydrotalcite in composite with MgAl-HTlcs of 1.0wt%(mass fraction of MgAl-HTlcs, CL total quality). UV-Vis spectra show that, compared with pure nylon 6, the MgAl-HTlcs/nylon 6 composites can strongly absorb the ultraviolet rays whose wavelength is between 320-380 nm. XRD and DSC results show that a small amount of MgAl-HTlcs plays a good role in heterogeneous nucleation of nylon 6, and improves its crystallization temperature and crystallinity. Thermogravimetric analysis shows the exists of part exfoliated MgAl-HTlcs, which improves the thermal stability of composites obviously.
%K 反应挤出
%K 纳米类水滑石
%K 尼龙 6
%K 复合材料
%K 结构
%K 性能&lt
%K br&gt
%K reactive extrusion
%K nano hydrotalcite
%K nylon 6
%K composites
%K structure
%K properties
%U http://fhclxb.buaa.edu.cn/CN/abstract/abstract12543.shtml