%0 Journal Article
%T Quantum resistance standard accuracy close to the zero-dissipation state
%A F¨Ślicien Schopfer
%A Wilfrid Poirier
%J Physics
%D 2013
%I arXiv
%R 10.1063/1.4815871
%X We report on a comparison of four GaAs/AlGaAs-based quantum resistance standards using an original technique adapted from the well-known Wheatstone bridge. This work shows that the quantized Hall resistance at Landau level filling factor $\nu=2$ can be reproducible with a relative uncertainty of $32\times 10^{-12}$ in the dissipationless limit of the quantum Hall effect regime. In the presence of a very small dissipation characterized by a mean macroscopic longitudinal resistivity $\bar{R_{xx}(B)}$ of a few $\mu\Omega$, the discrepancy $\Delta R_{\mathrm{H}}(B)$ measured on the Hall plateau between quantum Hall resistors turns out to follow the so-called resistivity rule $\bar{R_{xx}(B)}=\alpha B\times d(\Delta R_{\mathrm{H}}(B))/dB$. While the dissipation increases with the measurement current value, the coefficient $\alpha$ stays constant in the range investigated ($40-120 \mathrm{\mu A}$). This result enlightens the impact of the dissipation emergence in the two-dimensional electron gas on the Hall resistance quantization, which is of major interest for the resistance metrology. The quantum Hall effect is used to realize a universal resistance standard only linked to the electron charge \emph{e} and the Planck's constant \emph{h} and it is known to play a central role in the upcoming revised \emph{Syst\`eme International} of units. There are therefore fundamental and practical benefits in testing the reproducibility property of the quantum Hall effect with better and better accuracy.
%U http://arxiv.org/abs/1301.5241v3