%0 Journal Article
%T Energy Harvesting Using an Analog Circuit under Multimodal Vibration
%A Shigeru Shimose
%A Kanjuro Makihara
%A Junjiro Onoda
%J Smart Materials Research
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/736487
%X The efficiency of harvesting energy from a vibrating structure using a piezoelectric transducer and a simple analog circuit is investigated experimentally. This analog circuit was originally invented for a synchronized switch damping on inductor (SSDI) technique, which enhances the damping of mechanical vibration. In this study, the circuit is used to implement a synchronized switch harvesting on inductor (SSHI) technique. A multiple degree of freedom (MDOF) structure is excited by single sinusoidal forces at its resonant frequencies and by random forces. The piezoelectric transducer converts this mechanical energy into electrical energy which is harvested using a standard rectifier bridge circuit with and without our analog circuit. Experimental results show that our analog circuit makes it possible to harvest twice as much energy under both single sinusoidal and random vibration excitations. 1. Introduction Energy harvesting techniques have been studied extensively in recent years. Energy harvesting is a process by which energy is captured and stored. Energy can be harvested from various power sources, including wind power, solar power, ocean tides, heart, magnetic fields, and structural vibrations. We focused on the vibration energy of a structure, using the piezoelectric effect to convert structural vibration energy into electrical energy. There is substantial research on this technique, as reviewed by Sodano et al. [1]. Lesieutre et al. [2] addressed the damping associated with energy harvesting from structural vibrations. Badel et al. [3¨C5] proposed a synchronized switch harvesting on inductor (SSHI) technique to improve energy harvesting. SSHI is based on vibration suppression technique named synchronized switch damping on inductor (SSDI). Both SSHI and SSDI use a piezoelectric transducer attached to the structure and connected to an inductive circuit having an on-off switch [6¨C10]. The switch in the circuit is flipped at each extremum of displacement of the structure. A displacement sensor and a controller are needed to synchronize the switching commands with the mechanical vibration. In a self-powered system, these sensors and controllers need to be driven using a fraction of the harvested energy. We previously invented an analog circuit that automatically performs switching without an external energy source [11]. We describe in this paper how this analog circuit enhances the energy harvesting performance when used with SSHI. Although many studies [12¨C14] have been conducted on SSHI, most of them are limited to the sinusoidal vibration of a
%U http://www.hindawi.com/journals/smr/2013/736487/