%0 Journal Article
%T Optimisation of the Nonlinear Suspension Characteristics of a Light Commercial Vehicle
%A Din£¿er £¿zcan
%A ¨¹mit S£¿nmez
%A Levent G¨¹ven£¿
%J International Journal of Vehicular Technology
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/562424
%X The optimum functional characteristics of suspension components, namely, linear/nonlinear spring and nonlinear damper characteristic functions are determined using simple lumped parameter models. A quarter car model is used to represent the front independent suspension, and a half car model is used to represent the rear solid axle suspension of a light commercial vehicle. The functional shapes of the suspension characteristics used in the optimisation process are based on typical shapes supplied by a car manufacturer. The complexity of a nonlinear function optimisation problem is reduced by scaling it up or down from the aforementioned shape in the optimisation process. The nonlinear optimised suspension characteristics are first obtained using lower complexity lumped parameter models. Then, the performance of the optimised suspension units are verified using the higher fidelity and more realistic Carmaker model. An interactive software module is developed to ease the nonlinear suspension optimisation process using the Matlab Graphical User Interface tool. 1. Introduction Vehicle suspension design and performance problems have been studied extensively using simple car models such as two degrees-of-freedom (d.o.f.) quarter car, four or six d.o.f. half car, or seven d.o.f. full car models. Usually, the suspension design methodologies are based on analytical methods where a linear vehicle model is investigated by solving linear ordinary differential equations. Laplace and Fourier transforms are valuable tools that are used while investigating suspension units with linear characteristics. The performance functions represented by transfer functions in Laplace and/or Fourier domains are considered to be related to ride comfort, tire forces, and handling criteria versus road roughness input to achieve an optimum design. On the other hand, the investigation of nonlinear suspension characteristics must be based more on numerical methods rather than analytical methods due to the more complicated nature of the problem. In this investigation, both linear and nonlinear spring and damper characteristics of a light commercial vehicle are considered and used in an optimisation study. Lumped parameter suspension models are used in this paper. Mass, stiffness, and damping are distributed spatially throughout a mechanical system like a suspension. Mass, stiffness, and damping are therefore functions of spatial variables ( , and coordinates) in a mechanical system, resulting in what is called a distributed parameter system since the mass, stiffness, and damping parameter
%U http://www.hindawi.com/journals/ijvt/2013/562424/