%0 Journal Article
%T Fuel Efficiency by Coasting in the Vehicle
%A Payman Shakouri
%A Andrzej Ordys
%A Paul Darnell
%A Peter Kavanagh
%J International Journal of Vehicular Technology
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/391650
%X This paper investigates the possibility of improving the fuel efficiency by decreasing the engine speed during the coasting phase of the vehicle. The proposed approach is stimulated by the fact that the engine losses increase with the engine speed. If the engine speed is retained low, the engine losses will be reduced and subsequently the tractive torque will be increased, enabling the vehicle to remain moving for longer duration while coasting. By increasing the time period of the coasting the fuel efficiency can be increased, especially travelling downhill, since it can benefit from the kinematic energy stored in the vehicle to continue coasting for a longer duration. It is already industry standard practice to cut fuel during coasting and refuel at low engine speed. The substantial difference proposed in this paper is the controlled reduction of engine speed during this phase and thus reduction in the engine losses, resulting in improved fuel economy. The simulation model is tested and the results illustrating an improvement to the fuel efficiency through the proposed method are presented. Some results of the experimental tests with a real vehicle through the proposed strategy are also presented in the paper. 1. Introduction Fuel efficiency has been widely researched in the literature from different aspects. Barrand and Bokar [1], Tarpinian et al. [2] have investigated the influence of tyre rolling resistance on fuel saving. Lee et al. [3] have investigated the fuel efficiency through the powertrain and explained that it can be improved by almost locking up the torque converter clutch (TCC) when the vehicle is in coasting. The reason is that energy efficiency can increase up to 100% due to eliminating the slip between the turbine and the impeller. However, if the torque converter is fully locked-up at high speed and the driver lifts the foot from the accelerator pedal, the engine torque suddenly will fall to zero which causes the driver to feel the momentary shock at the moment of lift-up. Thus, the latter paper has proposed an adaptive antishock coasting control to reduce the shock without degrading the fuel economy. Another approach which is commonly used in Hybrid Electric Vehicle (HEV) is the engine start/stop system [4]. Based on this approach, the engine fuelling can be cut off when the engine operates in idle speed. This approach is significantly beneficial for the vehicle in coasting, because fuelling the engine can be stopped during the coast phase of the vehicle. Lee [4] has studied the benefit of applying the ¡°burn and coast¡± method in the
%U http://www.hindawi.com/journals/ijvt/2013/391650/