%0 Journal Article
%T Simple and Versatile Dynamic Model of Spherical Roller Bearing
%A Behnam Ghalamchi
%A Jussi Sopanen
%A Aki Mikkola
%J International Journal of Rotating Machinery
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/567542
%X Rolling element bearings are essential components of rotating machinery. The spherical roller bearing (SRB) is one variant witnessing increasing use because it is self-aligning and can support high loads. It is becoming increasingly important to understand how the SRB responds dynamically under a variety of conditions. This study introduces a computationally efficient, three-degree-of-freedom, SRB model that was developed to predict the transient dynamic behaviors of a rotor-SRB system. In the model, bearing forces and deflections were calculated as a function of contact deformation and bearing geometry parameters according to the nonlinear Hertzian contact theory. The results reveal how some of the more important parameters, such as diametral clearance, the number of rollers, and osculation number, influence ultimate bearing performance. One pair of calculations looked at bearing displacement with respect to time for two separate arrangements of the caged side-by-side roller arrays, when they are aligned and when they are staggered. As theory suggests, significantly lower displacement variations were predicted for the staggered arrangement. Following model verification, a numerical simulation was carried out successfully for a full rotor-bearing system to demonstrate the application of this newly developed SRB model in a typical real world analysis. 1. Introduction Bearings are one of the most important components in mechanical systems, and their reliable operation is necessary to ensure the safe and efficient operation of rotating machinery [1]. For this reason, a multipurpose dynamic roller bearing model capable of predicting the dynamic vibration responses of rotor-bearing systems is important. However, bearings introduce nonlinearities, often leading to unexpected behaviors, and these behaviors are sensitive to initial conditions. For rolling element bearings, the significant sources of nonlinearity are radial clearance between the rolling elements and raceways and the nonlinear restoring forces between the various curved surfaces in contact. A special type of nonlinearity is introduced to the system if the contact surfaces have distributed defects, such as waviness, or localized defects, such as inner or outer ring defects. Goenka and Booker [2] extended the general applicability of the finite element method to include spherical roller bearings (SRBs). In their research, triangular finite elements with linear interpolation functions were used to model the lubricant film. Loading conditions for spherical roller bearings with elastohydrodynamic and
%U http://www.hindawi.com/journals/ijrm/2013/567542/