%0 Journal Article
%T Large Eddy Simulation for Dispersed Bubbly Flows: A Review
%A M. T. Dhotre
%A N. G. Deen
%A B. Niceno
%A Z. Khan
%A J. B. Joshi
%J International Journal of Chemical Engineering
%D 2013
%I Hindawi Publishing Corporation
%R 10.1155/2013/343276
%X Large eddy simulations (LES) of dispersed gas-liquid flows for the prediction of flow patterns and its applications have been reviewed. The published literature in the last ten years has been analysed on a coherent basis, and the present status has been brought out for the LES Euler-Euler and Euler-Lagrange approaches. Finally, recommendations for the use of LES in dispersed gas liquid flows have been made. 1. Introduction Gas-liquid flows are often encountered in the chemical process industry, but also numerous examples can be found in petroleum, pharmaceutical, agricultural, biochemical, food, electronic, and power-generation industries. The modelling of gas-liquid flows and their dynamics has become increasingly important in these areas, in order to predict flow behaviour with greater accuracy and reliability. There are two main flow regimes in gas-liquid flows: separated (e.g., annular flow in vertical pipes, stratified flow in horizontal pipes) and dispersed flow (e.g., droplets or bubbles in liquid). In this work, we consider only dispersed bubbly flows. Dispersed Bubbly Flow. The description of bubbly flows involves modelling of a deformable (gas-liquid) interface separating the phases; discontinuities of properties across the phase interface; the exchange between the phase; and turbulence modelling. Most of the dispersed flow models are based on the concept of a domain in the static (Eulerian) reference frame for description of the continuous phase, with addition of a reference frame for the description of the dispersed phase. The dispersed phase may be described in the same static reference frame as the continuous, leading to the Eulerian-Eulerian (E-E) approach or in a dynamic (Lagrangian) reference frame, leading to the Eulerian-Lagrangian (E-L) approach. In the E-L approach, the continuous liquid phase is modelled using an Eulerian approach and the dispersed gas phase is treated in a Lagrangian way; that is, the individual bubbles in the system are tracked by solving Newton¡¯s second law, while accounting for the forces acting on the bubbles. An advantage here is the possibility to model each individual bubble, also incorporating bubble coalescence and breakup directly. Since each bubble path can be calculated accurately within the control volume, no numerical diffusion is introduced into the dispersed phase computation. However, a disadvantage is, the larger the system gets the more equations need to be solved, that is, one for every bubble. The E-E approach describes both phases as two continuous fluids, each occupying the entire domain,
%U http://www.hindawi.com/journals/ijce/2013/343276/