%0 Journal Article %T Structural Vibration Monitoring Using Cumulative Spectral Analysis %A Satoru Goto %A Yoshinori Takahashi %A Mikio Tohyama %J Advances in Acoustics and Vibration %D 2013 %I Hindawi Publishing Corporation %R 10.1155/2013/158329 %X This paper describes a resonance decay estimation for structural health monitoring in the presence of nonstationary vibrations. In structural health monitoring, the structure's frequency response and resonant decay characteristics are very important for understanding how the structure changes. Cumulative spectral analysis (CSA) estimates the frequency decay by using the impulse response. However, measuring the impulse response of buildings is impractical due to the need to shake the building itself. In a previous study, we reported on system damping monitoring using cumulative harmonic analysis (CHA), which is based on CSA. The current study describes scale model experiments on estimating the hidden resonance decay under non-stationary noise conditions by using CSA for structural condition monitoring. 1. Introduction Structural health condition diagnostics are needed for ensuring the safety of buildings struck by earthquakes and old buildings. Spectral analysis focuses on the change in the resonant frequency caused by structural degradation, and it yields useful information for health monitoring. However, for structural health monitoring, spectral analysis requires a test signal. Although using a test signal is an easy way to measure structural spectral characteristics, it is impractical to vibrate a structure during every measurement. If the spectral characteristics could be measured using structural vibrations due to wind, ground motion, and so forth, the health of the structure would be able to be monitored all the time. However, this sort of measurement would require a lot of spectral information about external noise characteristics besides the structural spectral characteristics. For this reason, spectral characteristics analysis for structural health monitoring generally requires the external source characteristics to be known at all times [1, 2]. Hirata proposed the short-interval period (SIP) distribution to analyze the dominant spectral components of a structure subject to an unknown vibration or even nonstationary noise [3]. The SIP distribution represents the shape of the frequency response in poor measuring conditions. Recently, Hirata et al. showed that the SIP distribution can be used to get the gradual time variation of the frequency response of a structure subjected to nonstationary vibrations [4]. On the other hand, the SIP distribution requires a sufficiently long signal because the computational process of the SIP distribution uses information on the dominant frequency components taken from a number of short intervals. Takahashi et %U http://www.hindawi.com/journals/aav/2013/158329/