%0 Journal Article %T Use of nanofiltration membrane technology for ceramic industry wastewater treatment %A Moliner-Salvador %A R. %A Deratani %A A. %A Palmeri %A J. %A S芍nchez %A E. %J Bolet赤n de la Sociedad Espaˋola de Cer芍mica y Vidrio %D 2012 %I Sociedad Espa?ola de Cer芍mica y Vidrio %R 10.3989/cyv.152012 %X A study has been undertaken of an advanced wastewater treatment approach using polymer nanofiltration membranes, in an attempt to obtain water of sufficient quality to allow it to be reused in the same production process or, alternatively, to be discharged without any problems. The study has initially focused on the removal of organic matter (reduction of COD) and the most representative ions present in the wastewater, such as Na+, Mg2+, Cl- y SO42-. In a first part of the study, with a view to optimising the experimental phase, a simulation has been performed of the nanofiltration process using the NanoFlux software. Among other things, the simulation allows the most suitable membranes to be selected as a function of the permeate flow rate and desired level of retention in the substances to be removed. The subsequent experimentation was carried out in a laboratory tangential filtration system that works with flat membranes. It was found that retention values of about 90% were obtained for the studied substances, with a good permeate flow rate, using low operating pressures. These results demonstrate the feasibility of the studied technology and its potential as a treatment for improving ceramic industry wastewater quality. Este estudio ha sido emprendido con el fin de acercar la nanofiltraci車n a trav谷s de membranas polim谷ricas al tratamiento de las aguas residuales industriales de la industria cer芍mica, esperando obtener un agua con la suficiente calidad como para ser reutilizada en el propio proceso productivo o, alternativamente, poder verterla. El estudio se ha centrado en la eliminaci車n de materia org芍nica (reducci車n de D.Q.O) y algunos iones presentes en las aguas residuales, tales como Na+, Mg2+, Cl- y SO42-. En primer lugar, se ha realizado una simulaci車n del proceso de nanofiltraci車n usando el software NanoFlux. Entre otras cosas, la simulaci車n permite seleccionar las membranas m芍s apropiadas en funci車n del caudal de permeado obtenido y en funci車n del nivel de retenci車n de la sustancia que se desea eliminar. En una segunda parte, se realizaron los ensayos experimentales en un sistema de laboratorio de filtraci車n tangencial que trabaja con membranas planas. La retenci車n obtenida para las sustancias estudiadas es de aproximadamente el 90%. Todo ello, con un buen caudal de permeado y usando bajas presiones de trabajo. Estos resultados demuestran la viabilidad de la tecnolog赤a y su potencial como tratamiento para mejorar la calidad de las aguas residuales de esta industria. %K Nanofiltration %K Membrane %K Wastewater %K Ceramic Tiles Industry %K Red/White Ceramics %K Nanofiltraci車n %K Membrana %K Aguas Residuales %K Baldosas Cer芍micas %K Cer芍mica Roja/Blanca %U http://ceramicayvidrio.revistas.csic.es/index.php/ceramicayvidrio/article/view/1116/1151