%0 Journal Article %T Preparaci車n y caracterizaci車n f赤sico-qu赤mica y mec芍nica de mezclas ternarias de polilactida (PLLA), policaprolactona (PCL) y almid車n termopl芍stico (TPS) Preparation and physical-chemical and mechanical characterization of ternary blends of polylactide (PLLA), polycaprolactone (PCL) and thermoplastic starch (TPS) %A Jose H Mina %A Alex Valadez-Gonz芍lez %A Pedro Herrera-Franco %A Fabio Zuluaga %J Revista Latinoamericana de Metalurgia y Materiales %D 2013 %I Universidad Sim車n Bol赤var %X En este trabajo se evalu車 la influencia de la incorporaci車n de un almid車n termopl芍stico en las propiedades f赤sico-qu赤micas, t谷rmicas y mec芍nicas de mezclas ternarias de almid車n termopl芍stico (TPS), polilactida (PLLA) y policaprolactona (PCL). El TPS empleado se prepar車 a partir de la plastificaci車n de almid車n de yuca con un 30 % de glicerol usando la tecnolog赤a de extrusi車n. Se emplearon contenidos de TPS de 10, 20, 30, 40 y 50 % en masa, manteniendo una relaci車n constante de PLLA/PCL en 70:30. Se encontr車 que aunque la mezcla binaria inicial de PLLA/PCL fue predominantemente inmiscible, las propiedades mec芍nicas y t谷rmicas fueron proporcionales a la cantidad de cada uno de los constituyentes, resultando ser la policaprolactona la fase continua a pesar de encontrarse en menor proporci車n; as赤 mismo la incorporaci車n del almid車n termopl芍stico gener車 una disminuci車n de la resistencia mec芍nica y el m車dulo de elasticidad a tracci車n, siendo dicha disminuci車n una funci車n directa de la cantidad de TPS a adida, de igual manera se redujo la estabilidad t谷rmica y se increment車 la absorci車n de humedad de la mezcla ternaria, con el almid車n termopl芍stico. In this work we studied the thermoplastic starch incorporation on physico-chemical, thermal and mechanical properties of ternary blends of thermoplastic starch (TPS), polylactide (PLLA) and polycaprolactone (PCL). The TPS worked was obtaining from cassava starch and it was plasticized with 30 % (w/w) of glycerol using the extrusion technology. Five different percentages (10, 20, 30, 40 and 50 % w/w) of TPS were varying, maintaining constant the relation PLLA/PCL at 70:30. It was found that the binary blend PLLA/PCL was non-miscible and the polycaprolactone was the continua phase, with the TPS incorporation the mechanical strength and tensile modulus were reduced proportionally to the TPS added, also the moisture absorption was increasing and thermal stability was reduced in the ternary blends with the TPS incorporated. %K Almid車n Termopl芍stico %K Policaprolactona %K Polilactida %K mezclas termopl芍sticas %K Thermoplastic starch %K polycaprolactone %K polylactide %K thermoplastic blends %U http://wwww.scielo.org.ve/scielo.php?script=sci_arttext&pid=S0255-69522013000100009