%0 Journal Article
%T Effect of heating/cooling rate on the properties of BaTiO3 ceramics
%A Tongnam
%A C.
%A Rujijanagul
%A G.
%A Pangpat
%A K.
%A Arkornsakul
%A P.
%J Songklanakarin Journal of Science and Technology
%D 2005
%I Songkla University
%X The effect of heating/cooling rate on the physical, microstructural and dielectric properties of BaTiO3 ceramics has been studied. The heating/cooling rate using in this work is ranged from 10 to 20oC/min at sintering temperature of 1350oC for 2 hours. It was found that the physical properties of the barium titanate ceramics using heating/cooling rate of 20oC/min gave a higher value of percent shrinkage and density than that of 10 and 15oC/min. From the dielectric constant measurement, the maximum dielectric constant depended very much on the heating/cooling rates. The maximum dielectric constant of the ceramics using heating/ cooling rate of 20oC/min was higher that that of 10 and 15oC/min. Hence, the small grain size and high density of the ceramics using high heating/cooling rate may have an influence on the value of maximum dielectric properties of the BaTiO3 ceramics.
%K BaTiO3 ceramics
%K heating/cooling rate
%K dielectric constant
%U http://www.sjst.psu.ac.th/journal/27-4-pdf/15-BaTiO-ceramics.pdf