%0 Journal Article
%T Crosstalk In PLL Layout
%A Ms. Priyanka Dubey Mr. Pramod Patel Mr. Sandip Nemade
%J International Journal of Electronics Communication and Computer Engineering
%D 2011
%I IJECCE
%X Crosstalk is the effect on a signal caused by the high-speed switching of a nearby signal. This effect can manifest itself as jitter, which is the deviation of a signal¡¯s edge from its expected location. A large amount of jitter can cause a timing budget failure in a parallel system or it can cause a clock and data recovery PLL to incorrectly recover the data in a serial system. Copyright   2011 IJECCE, All right reserved 1 Due to the deleterious effects of crosstalk, it is important to determine the amount of crosstalk that exists during the worst case scenarios. Crosstalk is the effect on a signal caused by the high-speed switching of a nearby signal. This effect can manifest itself as jitter, which is the deviation of a signal¡¯s edge from its expected location. A large amount of jitter can cause a timing budget failure in a parallel system, or it can cause a clock and data. HHPLL to incorrectly recover the data in a serial system. Due to the negative effects of crosstalk, it is important to determine the amount of crosstalk that exists during the worst-case scenarios.
%K Crosstalk
%U http://www.ijecce.org/administrator/components/com_jresearch/files/publications/7PA.pdf