%0 Journal Article
%T A Simple and Precise Method for Radial Distortion Calibration<br>一种简单而精确的径向畸变标定方法
%A KONG Bin
%A FANG Ting jian
%A <br>孔斌
%A 方廷健
%J 中国图象图形学报
%D 2004
%I 
%X To implement accurate metric measurement within a large field of view with common off the shelf cameras, the image distortion caused by wide angle lenses should be corrected. A simple and precise method for calibrating the radial distortion is proposed. Any planar pattern in which the feature points form a grid can be used to obtain the calibration image. The proposed method first constructs an ideal image based on the positions of feature points extracted from the distorted image. Then the radial coordinates of the distorted and ideal feature points are calculated under the hypothesis of given center of distortion, and the relation function between the ideal and distorted radial coordinates is obtained by solving linear equations or by polynomial fitting. The set of parameters with the minimum mean square error is regarded as the calibration result. One merit of the proposed method is that both the undistorted to distorted and distorted to undistorted expression can be obtained at the same time by the same way. Moreover, the inverse power proportion relation between calibration result and resolution of rectified image is derived, and the influence of the order of distortion function on rectified image is discussed. Experiment results show that 4th or 5th order function would result better outcome.
%K image measurement
%K radial distortion
%K grid
%K polar coordinate system
%K (
%K m
%K th) power proportion
%K inverse power proportion<br>图像测量
%K 径向畸变
%K 栅格
%K 极坐标系
%K （m次）幂比例
%K 反幂比例
%K 图像几何畸变
%U http://www.alljournals.cn/get_abstract_url.aspx?pcid=5B3AB970F71A803DEACDC0559115BFCF0A068CD97DD29835&cid=8240383F08CE46C8B05036380D75B607&jid=D06194629680C940ACE75262F54B9D85&aid=93F14ED0242BFA23&yid=D0E58B75BFD8E51C&vid=9CF7A0430CBB2DFD&iid=E158A972A605785F&sid=9BA67A0B76A3DBA8&eid=E57FE519484CFB70&journal_id=1006-8961&journal_name=中国图象图形学报&referenced_num=2&reference_num=10