%0 Journal Article
%T Preparation and Properties of ZrB2-SiC Ceramic Composites Reinforced by Carbon Nanotubes<br>碳纳米管-ZrB2-SiC陶瓷基复合材料的制备与性能研究
%A YANG Fei-Yu
%A ZHANG Xing-Hong
%A HAN Jie-Cai
%A DU Shan-Yi
%A <br>杨飞宇
%A 张幸红
%A 韩杰才
%A 杜善义
%J 无机材料学报
%D 2008
%I Science Press
%X ZrB2-SiC- xwt% carbon nanotubes(x=0, 1.0, 2.5, 4.0) ceramic composites were fabricated by the hot-pressing sintering. The prepared conditions, mechanical properties and microstructure were also investigated. TEM was used to observe the microstructure and SEM was used to analyze the fracture surface and crack propagation. Then, the strengthening and toughening mechanism of carbon nanotubes were discussed. Results show that carbon nanotubes can deposit in the ZrB2 crystal grain and form intragranular structure. When the carbon nanotubes content is 2.5wt%, the flexural strength and toughness reach 542MPa and 6.10MPa·m1/2 respectively, with the relative density of 99.6% and Vickers hardness value of 21.7GPa. The reasons of the mechanical properties improvement are the increased compactness, grain refining and the intragranular structure caused by the introduction of carbon nanotubes.
%K carbon nanotube
%K ZrB2 based ceramic composite
%K microstructure
%K mechanical properties<br>碳纳米管
%K ZrB2陶瓷基复合材料
%K 微观组织
%K 力学性能
%U http://www.alljournals.cn/get_abstract_url.aspx?pcid=5B3AB970F71A803DEACDC0559115BFCF0A068CD97DD29835&cid=84529CA2B2E519AC&jid=ABC0063016AF57E1C73EF43C8D2212BD&aid=4C3527E7F9A46228CBA75979C370C089&yid=67289AFF6305E306&vid=EA389574707BDED3&iid=94C357A881DFC066&sid=114891522AE71A91&eid=F5956B5D26BCB2A8&journal_id=1000-324X&journal_name=无机材料学报&referenced_num=0&reference_num=11